Bosch AKE 30 LI (0600837100) - Инструкция по эксплуатации - Страница 35

 English | 

35

Bosch Power Tools

F 016 L81 531 | (4.4.16)

Maintenance and Cleaning



Warning: Switch off and remove battery from power 
tool before adjusting or cleaning.

Note: 

To ensure long and reliable service, carry out the follow-

ing maintenance regularly.

For safe and proper working, always keep the power tool and 
its ventilation slots clean.

Regulary check the chain saw for obvious defects such as 
loose, dislodged or damaged saw chain and chain bar, loose 
fixings and worn or damaged components.

Check that covers and guards are undamaged and correctly 
fitted. Carry out necessary maintenance or repairs before us-
ing.

Note: 

Before returning the chain saw, ensure all oil in the oil 

reservoir has been emptied.

In all correspondence and spare parts orders, please always 
include the 10-digit article number given on the type plate of 
the chain saw.

Replacing/Changing the Saw Chain and Chain Bar 
(see figures C1 – C4)

Check the saw chain and chain bar according to section “Ten-
sioning the Saw Chain”.

The circular groove of the chain bar will wear particularly on 
the lower edge with time. When replacing the saw chain, turn 
the chain bar by 180 ° to allow even wear, thus extending 
chain bar life.

Check the drive sprocket 

28

. If it is worn out or damaged due 

to strain, have it exchanged by an authorized Bosch after-
sales service.

Sharpening the Saw Chain

Have your chain sharpened professionally at your authorised 
Bosch after-sales service or sharpen it yourself with a sharp-
ening kit suitable for the chain recommended for your chain-
saw. Observe the sharpening instructions provided with the 
sharpening kit.

Checking the Automatic Oiler

Proper functioning of the automatic saw chain oiler can be 
checked by running the chain saw and pointing the tip of the 
chain bar towards a piece of cardboard or paper on the 
ground. Do not touch the ground with the chain and ensure a 
safety clearance of 20 cm. If an increasing oil pattern devel-
opes, the automatic oiler is operating fine. If there is no oil 
pattern despite a full oil reservoir, see section “Troubleshoot-
ing” or contact your authorized Bosch after-sales service.

After Use/Storage

Clean the moulded plastic housing of the chain saw using a 
soft brush and clean cloth. Do not use water, solvents or pol-
ishes. Remove all debris, especially from the motor cooling 
vents.

After 1 – 3 hours of use, remove the cover 

13

, the chain bar 

10

 and the saw chain 

11

, and clean them using a brush.

Clean the area under the cover 

13

, the drive sprocket 

28

 and 

the chain bar assembly from adherant debris using a brush. 
Clean the oil outlet 

31

 with a clean cloth.

If the chain saw is to be stored for a longer period of time, 
clean the saw chain 

11

 and the chain bar 

10

.

Store the chain saw in a secure, dry place, out of the reach of 
children.

Do not place other objects on the power tool.

Please take care to place down the chain saw with the oil filler 
cap 

4

 facing upward.

When storing in the sales packaging, the oil reservoir must be 
completely emptied.



Do not modify this product. 

Unauthorized modifications 

may impair the safety of your product and may result in in-
creased noise and vibration.

Accessories

Saw chain

AKE 30 LI   . . . . . . . . . . . . . . . . . . . . . . . . . . . . F 016 800 256

Additional accessories

Saw chain oil, 1 litre  . . . . . . . . . . . . . . . . . . . .  2 607 000 181

Continuous lighting 
of the battery charge 
indicator

 24

No charging proce-
dure possible

Battery not (properly) inserted

Properly insert battery into battery charger

Battery contacts contaminated

Clean the battery contacts (e. g. by inserting and 
removing the battery several times) or replace the 
battery

Battery pack defective

Replace the battery

The charge control 
LEDs 

24

 and 

25

 re-

spectively, do not 
light up after insert-
ing the mains plug in-
to the socket

Mains plug of battery charger not plugged in 
(properly)

Insert mains plug (fully) into the socket outlet

Socket outlet, mains cable or battery charger de-
fective

Check the mains voltage; have the battery charger 
checked by an authorised after-sales service 
agent for Bosch power tools

Problem

Possible Cause

Corrective Action

OBJ_BUCH-1275-004.book  Page 35  Monday, April 4, 2016  1:04 PM