Electrolux LFG525K - Инструкция по эксплуатации - Страница 5

5

painted appliances on the outside, 
use a cloth dipped in lukewarm wa-
ter and neutral detergent. To clean 
steel, copper or brass appliances 
on the outside, it is always best to 
use speci

fi

  c products, following the 

instructions on the products them-
selves. To clean the inside of the 
appliance, use a cloth (or brush) 
dipped in denatured ethyl alcohol.

Clean grease 

fi

 lters in relation to use, at least 

every 2 months to prevent the risk of 

fi

 re.

Hand wash or clean in a dishwasher using a 
neutral detergent. If washing in the dishwa-
sher, possible discoloration of the 

fi

 lters does 

not in any way compromise their functioning.

The activated charcoal 

fi

 lter is not washable 

and cannot be regenerated, and must be 
replaced approximately every 4 months of 
operation, or more frequently for particularly 
heavy usage.

4. CONTROLS

Models LFG525S, LFG525W, LFG525K:
Switch A: LIGHT; position 0: light off; position 
1: light on.
Switch B: MOTOR SPEED: makes it possible 
to select the motor operating speed; position 
0: motor off.
C: Motor on light.

Models LFG517X, LFG615X, LFG615W:
Button P1: 

fi

 rst speed motor ON/OFF switch.

Button P2 (Models LFG615X, LFG615W): 
Change motor speed (1-2-3-P-1-2-3-P….). 
At fourth speed the letter on display “P” is on 
(Booster). The 4th speed remain active for 5 
minuts then going back in 3th.   
Button P2 (Model LFG517X): Change motor 
speed (1-2-3-4-1-2-3-4….).  
Button P3: Timer. Activate and deactivate 
timer (5 minuts). If the timer is active, the 
number correspondent at the speed 

fl

 ashing.

Button P4: Lights. Turns the lights on/off.
Button P1 + P4 : Filter Alarm Reset. When 
display shown an “F” letter 

fl

 ashing, the 

grease 

fi

 lters must be cleaned (40 hours of 

operation). When display shown an “C” letter 

fl

 ashing, the charcoal 

fi

 lters must be repla-

ced (160 hours of operation) and the grease 

fi

 lters must be cleaned.

Obviously, if the hood is not a 

fi

 ltering model 

and does not have a charcoal  

fi

 lters, clean 

the grease 

fi

 lters both when display shown 

“F” and when display shown “C”. The 

fi

 lter 

alarm can be seen when the motor is off and 
for about 30 seconds. To RESET the hour 
counter, keep simultaneously the buttons 
P1 and P4 pressed for 2 seconds while the 
alarm can be seen.

5. LIGHTING

If the light spot is damaged, it must be re-
placed only by the manufacturer, its service 
agent or similarly quali

fi

 ed persons in order 

to avoid a hazard.

ENGLISH