Candy CFT610/2 W - Инструкция по эксплуатации - Страница 3

alphabet letters. 

Closely follow the instructions set out in this manual. 

All 

responsibility,  for any eventual inconveniences, damages or 
fires caused by not complying with the instructions in this 
manual, is declined.  
The hood is supplied with an upper air outlet 

(circular- A1 - 

bayonet fixture + screw) 

and at the back  

(rectangular - A2(*) 

- fixed with 2 screws) 

for discharging the fumes outside. 

(Suction version A

), choose the discharge direction desired 

and remove the corresponding pre-fractural metal wall and 
mount the connection tube of the same form. Check that 
selector

  G

 is in 

suction

 position 

(A).

 If it is not possible to 

discharge the cooking fumes and steam outside, the

 filtering 

version

 hood can be used, mounting a carbon filter 

(*)

. The 

fumes and steam are recycled through a front grill placed over 
the command panel (do not remove the pre-fractural walls!). 
Check that 

selector G

 is in filtering position 

(F)

. 

  Caution 

WARNING!

 Do not connect the appliance to the mains until the 

installation is fully complete.  
Before any cleaning or maintenance operation, disconnect the 
hood from the mains by removing the plug or disconnecting the 
home mains switch.  
The appliance is not intended for use by children or persons 
with impaired physical, sensorial or mental faculties, or if 
lacking in experience or know-how, unless they are under 
supervision or have been trained in the use of the appliance by 
a person responsible for their safety. 
Children should be monitored to ensure that they do not play 
with the appliance. 
Never use the hood without effectively mounted grating.! 
The hood must NEVER be used as a support surface unless 
specifically indicated. 
The premises must be sufficiently ventilated, when the kitchen 
hood is used together with other gas combustion devices or 
other fuels.  
The suctioned air must not be conveyed into a conduit used for 
the disposal of the fumes generated by appliances that 
combust gases or other fuels. 
The flaming of foods beneath the hood itself is severely 
prohibited. 
The use of exposed flames is detrimental to the filters and may 
cause a fire risk, and must therefore be avoided in all 
circumstances.  
Any frying must be done with care in order to make sure that 
the oil does  not overheat and burst into flames. 
As regards the technical and safety measures to be adopted 
for fume discharging it is important to closely follow the 
relations provided by the competent authorities.  
The hood must be regularly cleaned on both the inside and 
outside (AT LEAST ONCE A MONTH, it is in any event 
necessary to proceed in accordance with the maintenance 
instructions provided in this manual).. 
Failure to follow the instructions as concerns hood and filter 
cleaning will lead to the risk of fires. 
Do not use or leave the hood without the lamp correctly 
mounted because of the possible risk of electric shocks. 

We decline any responsibility for any problems, damage or 
fires caused to the appliance as the result of the non-
observance of the instructions included in this manual. 
This appliance is marked according to the European directive 
2002/96/EC on Waste Electrical and Electronic Equipment 
(WEEE). By ensuring this product is disposed of correctly, you 
will help prevent potential negative consequences for the 
environment and human health, which could otherwise be 
caused by inappropriate waste handling of this product. 

The symbol 

 on the product, or on the documents 

accompanying the product, indicates that this appliance may 
not be treated as household waste. Instead it should be taken 
to the appropriate collection point for the recycling of electrical 
and electronic equipment. Disposal must be carried out in 
accordance with local environmental regulations for waste 
disposal. 
For more detailed information about treatment, recovery and 
recycling of this product, please contact your local council, your 
household waste disposal service or the shop where you 
purchased the product. 

Installation 

The minimum distance between the supporting surface for the 
cooking vessels on the hob and the lowest part of the range 
hood must be not less than 50cm from electric cookers and 
65cm from gas or mixed cookers. 
If the instructions for installation for the gas hob specify a 
greater distance, this must be adhered to. 
The template 

(*)

 can be used for installation. 

  Electrical connection 

The mains power supply must correspond to the rating 
indicated on the plate situated inside the hood. If provided with 
a plug connect the hood to a socket in compliance with current 
regulations and positioned in an accessible area. If it not fitted 
with a plug (direct mains connection) or if the plug is not 
located in an accessible area apply a bi-polar switch in 
accordance with standards which assures the complete 
disconnection of the mains under conditions relating to over-
current category III, in accordance with installation instructions. 

Warning: 

Before re-connecting the hood circuit to the mains 

supply and checking the efficient function, always check that 
the mains cable is correctly assembled. 

IMPORTANT!

 Power cable replacement must be undertaken  

by the authorized service assistance centre or similar qualified 
person. 

Operation 

The hood is fitted with a control panel with aspiration speed 
selection control and a light switch to control cooking area 
lights. 

Maintenance 
ATTENTION! 

Before performing any maintenance operation, 

isolate the hood from the electrical supply by switching off at 
the connector and removing the connector fuse.  
Or if the appliance has been connected through a plug and 
socket, then the plug must be removed from the socket.