Sony DCR-IP45E - Инструкция по эксплуатации - Страница 248

248

C:21:00

English

Self-diagnosis display

Five-digit display

Cause and/or Corrective Actions

• You are using a battery pack that is not an “InfoLITHIUM”

battery pack.

c

Use an “InfoLITHIUM” battery pack (p. 263).

• Moisture condensation has occurred.

c

Remove the cassette and leave your camcorder for at least
one hour to acclimatise (p. 270).

• The video heads are dirty.

c

Clean the heads using the cleaning cassette (optional)
(p. 271).

• A malfunction other than the above that you can service has

occurred.*

c

Remove the cassette and insert it again, then operate your
camcorder.

c

Disconnect the mains lead of the AC adaptor or remove the
battery pack. After reconnecting the power source, operate
your camcorder.

• A malfunction that you cannot service has occurred.

c

Contact your Sony dealer or local authorised Sony service
facility and inform them of the 5-digit code.
(example: E:61:10)

If you are unable to rectify the problem even if you try corrective actions a few times, contact your
Sony dealer or local authorised Sony service facility.

* Do not perform this operation if moisture starts to condense (p. 270).

Your camcorder has a self-diagnosis display
function.
This function displays the current condition of
your camcorder as a five-digit code (a combination
of a letter and figures) on the LCD screen. If a five-
digit code is displayed, check the following code
chart. The last two digits (indicated by 

ss

) will

differ depending on the state of your camcorder.

C:21:

ss

LCD screen or Viewfinder

Self-diagnosis display

•C:

ss

:

ss

You can service your camcorder
yourself.

•E:

ss

:

ss

Contact your Sony dealer or local
authorised Sony facility.

E:20:

ss

E:61:

ss

E:62:

ss

C:31:

ss

C:32:

ss

C:04:

ss

C:22:

ss