Faber GALILEO SMART BK F600 + KIT LL H80 - Инструкция по эксплуатации - Страница 12

Pause function

This  function  allows  you  to  pause/restart  any  active  function  on  the  hob,  by  reducing  the  power

available  in  the  cooking  area  and  resetting  all  the  functions.  If  the  Pause  function  is  not  disabled

with 10 minutes, the hob automatically switches off.
To  enable:  With  a  pan  on  the  hob  and  the  cooking  area  selected,  press  and  hold  the  Pause  func-

tion key 

 for at least 1 second. All the displays show 

.

To  disable:  press  and  hold 

  for  1  second  until  it  starts  flashing.  Press  any  other  key  within  10

seconds. The function is disabled and the hob continues with the previous settings.

Recall function

This  function  is  used  to  recall  the  function  settings  of  the  hob  if  it  is  switched  off  by  mistake  or  the

electricity is unexpectedly cut off.

When  the  hob  is  switched  off,  if  it  is  switched  on  again  with  6  seconds  by  touching 

,  the 

key flashes for 6 seconds. Press the 

 key to recall the functions set previously. A beep is emit-

ted to confirm the operation.

Combo mode (“bridge”

function)

This  function  allows  2  cooking  areas  to  be  combined  to  use  and  control  them  as  if  they  were  one

and have a bigger cooking area at your disposal. This function allows you to use pans with a wider

base.
Only the cooking areas on the left and on the right can be selected for use with this function.
To enable/disable: press the digits of the left-hand or right-hand cooking areas at the same time to

select  the  2  areas  be  combined  until  the 

  digit  appears  to  show  that  the  function  has  been  en-

abled. The other digit is used to set the power level.

AUTO function

“A”

The  standard  setting  when  the  hob/suction  hood  is  switched  on  is  for  the  hood  to  start  up  in  auto-

matic mode with the LED “A” brightly lit. The Hood comes into operation if the power in the cooking

areas is greater than “1”.
It is deactivated by pressing the LED “A” which changes intensity from bright to dim in confirmation.

It  can  also  be  deactivated  by  pressing  a  value,  higher  than  “1”,  on  the  power  bar,  which  is  con-

firmed by the fact that the LED “A” changes intensity from bright to dim.
It is reactivated by pressing the LED “A” which changes to brightly lit.

11. COOKING TABLE

Power level

Cooking method

To be used for

1

Melting, heating gently

Butter, chocolate, gelatine, sauces

2

Melting, heating gently

Butter, chocolate, gelatine, sauces

3

Warming up

Rice

4

Prolonged cooking, thickening, stewing

Vegetables, potatoes, sauces, fruit, fish

5

Prolonged cooking, thickening, stewing

Vegetables, potatoes, sauces, fruit, fish

6

Prolonged cooking, braising

Pasta, soups, braised meat

7

Light frying

Rösti  (potato  fry-ups),  omelettes,  breaded  and  fried

foods, sausages

8

Frying, deep fat frying

Meat, chips

9

Quick frying at high temperature

Steak

P

Quick heating

Boiling water

12. SUCTION HOOD

FUNCTIONS

The  controls  for  the  cooking  areas,  suction  hood  and  timer

can be activated by pressing on the reference Digit.

“ 

9

 “

Press  “  9  “  on  the  power  bar  to  set  INTENSIVE  1

speed.  This  setting  is  timed  to  operate  for  10

minutes.  Once  this  time  has  passed,  the  system

will  automatically  return  to  the  speed  set  previ-

ously.  It  is  deactivated  by  selecting  a  different

speed.

“ 

P

 “

Press  “  9  “  on  the  power  bar  twice  to  set  INTENS-

IVE  2  speed.  This  setting  is  timed  to  operate  for  5

minutes.  Once  this  time  has  passed,  the  system

will  automatically  return  to  the  speed  set  previ-

ously.  It  is  deactivated  by  selecting  a  different

speed.

12