De Dietrich DTE 714 E - Инструкция по эксплуатации - Страница 43

43

MOST SUITABLE COOKWARE TO

BE USED WITH THE ELECTRIC

PLATE (depending on model)

Use cookware with flat bottoms that are per-
fectly flush with the surface of the burner:

— 

in stainless steel with a thick, tri-metal or

“sandwich” bottom,

— 

in aluminium with a thick (smooth) bottom,

— 

in enamelled steel.

SWITCHING ON THE ELECTRIC

PLATE (depending on the model)

Position the knob on the marking that corre-
s p o n d s   t o   t h e   d e s i r e d   t y p e   o f   c o o k i n g
(Fig. 01) (see cooking guide at the end of this
guide). The cooking zone’s power indicator
lights up.
Upon first use, allow the plate to heat up with
no cookware at maximum power for 3 minutes
to harden the coating.

Tip

— 

Use cookware of an appropriate

size: the diameter of the bottom of the
cookware should be equal to or greater
than the diameter of the electric cooking
plate 

(Fig. 02)

.

— 

When cooking is nearly finished, turn the

knob to the “O” off position to take
advantage of the heat accumulated in the
plate.
— Use a lid on your cookware as often as
possible to reduce loss of heat from
evaporation.

Warning

Do not operate an electric cooking

plate without cookware (except during ini-
tial use) or with an empty pot.

Warning

The electric plate will remain hot for a

certain time after the knob has been turned
to the “O” position. Do not touch this zone
because there is a risk of burning.

2

2  //   USING YOUR APPLIANCE

•

•

•

•

YES

NO

Fig. 01

Fig. 02

Indicator light

99643492_A_ML.qxp  08/06/2007  14:17  Page 43