De Dietrich DTE 714 E - Инструкция по эксплуатации - Страница 41

41

LIGHTING THE HOB

The burner safety measure is a metal rod

located directly to the side of the flame.

Each burner is controlled by a tap fitted with a
safety system that, in the event of accidental
flame extinction (spills, draughts, etc.), quick-
ly and automatically cuts the gas supply and
prevents it from escaping.
Each burner is supplied by a tap which can be
opened by pressing it and turning it in a coun-
terclockwise direction.

The point “

●

” corresponds to a closed tap.

Choose the desired burner by using the sym-
bols located near the knobs (e.g.: right rear
burner ).

To light the burner:

— 

Press on the knob and turn it in a counter-

clockwise direction

to the maximum set-

ting .

Continue pressing on the knob to produce a
series of sparks until the burner lights.

The setting for more moderate flame intensi-
ties is between the 

symbol and the 

symbol.

2

2  //   USING YOUR APPLIANCE

•

•

Fig. 01

Tip

—

If the flame goes out accidentally,

reignite normally following the lighting
instructions.
—

The burner’s flames are smaller near the

support to protect the support’s enamel.
—

The noise made by certain burners is

related to their high power and to gas
combustion; it does not alter cooking
quality.
—

In the event of a power cut, place a

lighted match near an open burner.

Warning

— Hold the knob fully pressed down

for a few seconds after the flame appears
in order to trigger the safety system.

99643492_A_ML.qxp  08/06/2007  14:17  Page 41