Kuppersberg ICS 606 - Инструкция по эксплуатации - Страница 62

62

TECHNICAL PASSPORT

ENGLISH

Induction Hob

9.4  Before locating the fixing 

brackets

The unit should be placed on a sta-

ble, smooth surface (use the packaging). 

Do not apply force onto the controls 

protruding from the hob

9.5 Adjusting the bracket 

position

Fix the hob on the work surface 

by screw 2 brackets on the bottom of 

hob(see picture) after installation.

Adjust the bracket position to suit 

for different table top thickness.

9.6  Cautions

1. The induction hotplate must be 

installed by qualified personnel or tech-

nicians. We have professionals at your 

service. Please never conduct the opera-

tion by yourself.

2. The hob will not be installed di-

rectly above a dishwasher, fridge, freez-

er, washing machine or clothes dryer, 

as the humidity may damage the hob 

electronics

3. The induction hotplate shall be 

installed such that better heat radiation 

can be ensured to enhance its reliability.

4. The wall and induced heating 

zone above the table surface shall with-

stand heat.

5. To avoid any damage, the sand-

wich layer and adhesive must be resis-

tant to heat.

6. A steam cleaner is not to be used.

9.7  Connecting the hob to the 

mains power supply

This hob must be con-

nected to the mains power 

supply only by a suitably 

qualified persol

Before connecting the 

hob to the mains power 

supply, check that:

1. The domestic wiring system is 

suitable for the power drawn by the hob.

2. The voltage corresponds to the 

value given in the rating plate

3. The power supply cable sections 

can withstand the load specified on the 

rating plate.

Under any circumstances, 

the brackets cannot touch 

with the inner surfaces of the 

worktop after installation 

(see picture).