Kuppersberg ICS 606 - Инструкция по эксплуатации - Страница 54

54

TECHNICAL PASSPORT

ENGLISH

Induction Hob

7.    H I N T S  A N D  T I P S       

Problem

Possible causes

What to do

The induction 

hob cannot be 

turned on.

No power.

Make sure the induction hob is

connected to the power supply

and that it is switched on.

Check whether there is a power

outage in your home or area. If

you’ve checked everything and the 

problem persists, call a qualified

technician.

The touch 

controls are 

unresponsive.

The controls are locked.

Unlock the controls. See section

‘Using your induction cooktop’ for 

instructions.

The touch 

controls are 

difficult to 

operate.

There may be a slight film 

of water over the controls 

or you may be using the 

tip of your finger when 

touching the controls.

Make sure the touch control area is dry 

and use the ball of your finger when 

touching the controls.

The glass is 

being scratched.

Rough-edged cookware.

Unsuitable, abrasive 

scourer or

cleaning products being 

used.

Use cookware with flat and smooth 

bases. See ‘Choosing the right cookware’.

See ‘Care and cleaning’.

Some pans make 

crackling or 

clicking noises.

This may be caused by the

construction of your 

cookware

(layers of different metals

vibrating differently).

This is normal for cookware and

does not indicate a fault.

The induction 

hob makes a low 

humming noise 

when used on

a high heat 

setting.

This is caused by the 

technology

of induction cooking.

This is normal, but the noise should 

quieten down or disappear completely 

when you decrease the heat setting.

Fan noise 

coming from the 

induction hob.

A cooling fan built into 

your

induction hob has come 

on to

prevent the electronics 

from

overheating. It may 

continue to

run even after you’ve 

turned the

induction hob off.

This is normal and needs no action. Do 

not switch the power to the induction 

hob off at the wall while the fan is 

running.