Kuppersberg ICS 606 - Инструкция по эксплуатации - Страница 44

44

TECHNICAL PASSPORT

ENGLISH

Induction Hob

Touch the ON/OFF control. After power on, the buzzer 

beeps once, all displays show “–” or “– –”, indicating that the 

induction hob has entered the state of standby mode.

Place a suitable pan on the cooking zone that you wish 

to use.

Â

Make sure the bottom of the pan and the surface of 

the cooking zone are clean and dry.

Touching the heating zone selection control, and an 
indicator next to the key will flash

Select a heat setting by touching the slider control

Â

If  you  don’t  choose  a  heat  setting  within  1  minute, 

the  Induction  hob  will  automatically  switch  off.  You  will 

need to start again at step 1.

Â

You  can  modify  the  heat  setting  at  any  time  during 

cooking.

If the display flashes 

   alternately with the heat setting.

This means that:

you have not placed a pan on the correct cooking zone or, 

• the pan you’re using is not suitable for induction cooking or,

• the pan is too small or not properly centered on the cooking zone.

No heating takes place unless there is a suitable pan on the cooking zone.

The display “   ”will automatically disappear after 1 minute if no suitable pan is 

placed on it. 

3.3  How to use                                          
3.3.1  Start cooking