Stadler Form Eva - Инструкция по эксплуатации - Страница 9

English

Congratulations! You have just acquired the exceptional Eva air humidifier. It 
will give you great pleasure and improve the indoor air for you.

As with all domestic electrical appliances, particular care is also needed 
with this model in order to avoid injury, fire damage or damage to the appli-
ance. Please study these operating instructions carefully before using this 
appliance for the first time and follow the safety advice on the appliance 
itself.

Description of the appliance

The appliance consists of the following main components:
  1.  Mains cable for power supply
  2.  Remote Sensor

TM

 humidity sensor with remote control

  3.  Stand for Remote Sensor

TM

  4.  Battery compartment of Remote Sensor

TM

  (Type  A A A)

  5.  Position of the humidity sensor
  6.  Water tank with carrying handle
  7.  Water tank lid with anticalc cartridge
  8.  Anticalc cartridge
  9.  Water tray 
 10.  On/off  button
 11.  Button for the selection of the desired humidity (hygrostat: 30 – 75 %
    and continuous operation “CO“)
 12.  Button for the selection of the humidification output level 1 – 5 
 13.  Button for warm mode (water pre-heating)
 14.  Button for auto mode
 15.  Display with the indication for the current and desired (blinking) humidity
 16.  Water level indicator
 17.  Heating plate for water pre-heating
 18.  Silicone cover for the heating plate
 19.  Ultrasonic  membrane 
 20.  Fragrance  container
 21.  Button for night mode (LEDs normal, dimmed or off) and cleaning mode 
    (press for at least 5 seconds)
 22.  Symbol for a failed connection between Remote Sensor

TM

 and humidifier 

 23.  Mist  chamber
 24.  Silver  Cube

TM

 25.  Cleaning  brush 
 26. Air inlet (Caution: no water may enter this opening!)
 27.  Mist  outlet 

Important Safety Instructions

Please read through the operating instructions carefully before you use the 
appliance for the first time and keep them safely for later reference; if nec-
essary pass them on to the next owner.

• Stadler Form refuses all liability for loss or damage which arises as a 

result of failure to follow these operating instructions.

• The appliance is only to be used in the home for the purposes described 

in these instructions. Unauthorised use and technical modifications to the 
appliance can lead to danger to life and health.

• This appliance can be used by children aged from 8 years and above and 

persons with reduced physical, sensory or mental capabilities or lack of 

experience and knowledge if they have been given supervision or instruc-
tion concerning use of the appliance in a safe way and understand the 
hazards involved. Children shall not play with the appliance. Cleaning and 
user maintenance shall not be made by children without supervision.

• Only connect the cable to alternating current. Observe the voltage infor-

mation given on the appliance.

• Do not use damaged extension cords.

• Do not run the power cord over sharp edges and make sure that it does 

not get trapped.

• Do not pull the plug from the socket with wet hands or by holding on to 

the power cord.

• Do not use the appliance in immediate vicinity of a bath tub, a shower or a 

swimming pool (observe a minimum distance of 3 m). Place the appliance 
such that a person in the bath tub cannot touch the appliance.

• Do not place the appliance near a heat source. Do not subject the power 

cord to direct heat (such as a heated hotplate, open flames, hot iron sole 
plates or heaters for example). Protect power cords from oil.

• See to it that the appliance is properly positioned to ensure a high stabil-

ity during its operation and make sure that no one can trip over the power 
cord.

• The appliance is not splash-proof.

• For indoor use only.

• Do not store the appliance outdoors. 

• Store the appliance in a dry place inaccessible to children (pack the ap-

pliance).

• If the power cord is damaged, it must be replaced by the manufacturer 

or a repair shop authorized by the manufacturer or by similarly qualified 
persons in order to avoid a hazard.

• Prior to any maintenance, cleaning and after each use, switch off the ap-

pliance and unplug the mains cable from the socket. 

• Prior to cleaning the interior of the appliance, make sure the appliance has 

been off for at least 15 minutes!

• When the pre-heating is turned on, the water inside the appliance is 

heated: the water in the water tray (9) and the heating plate (17) become 
hot. Avoid touching the water and the heating plate!

• Place the appliance out of reach of children, as the water inside the ap-

pliance is heated up to 50 °C and the heating plate reaches hot tempera-
tures up to 75 °C.

Before setup: Anticalc cartridge and water hardness

The anticalc cartridge reduces the limescale in the water and the undesir-
able emission of limescale particles into the surroundings. Effective for one 
to three months, depending on water hardness (see table).

Important:

 Soak the anticalc cartridge in a water bath for 24 hours before 

the first use (not in the water tank!). The resin has to absorb water to reach 
high performance.

The period of time that the cartridge is effective for depends on the hard-
ness of the water. This can be tested using the testing strips provided (test-
ing strip stuck to the Quick Setup Guide).