VITEK VT-1255 VT - Инструкция по эксплуатации - Страница 7

7

              ENGLISH         

•  Set the steam supply regulator (3) to the off 

position

.

•  Fill the water tank (11) till the MAX mark (13).
•  Put the iron on the base (8). 
•  Insert the power plug into the outlet.
•  Set the temperature regulator (10) to the 

MAX. temperature: “

•••

” the (9) indicator 

will light up (Pic.3). 

•  When the sole temperature (12) reaches the 

desired temperature value, the (9) indicator 
will go out, you can start cleaning of the iron 
chamber.

•  Unplug the iron, set the temperature regula-

tor (10) to the 

«

MIN

» position

.

•  Pull the plug out of the socket.  
•  Hold the iron above the sink horizontally, set 

and hold the regulator (3) in the SELF  
CLEAN position (pic.7).

•  

Boiling water together with scale will be 
throwing out from the openings in the iron 
sole (12).

•  Slightly sway the iron back and forth, until 

water goes out of the water tank (11).

•  Place the iron on the base (8) and let it cool 

down completely.

•  When the sole (12) cools down completely, 

wipe it with a dry cloth.

•  Before you take the iron for storing, make 

sure that there is no water in the water tank 
(11) and that the iron sole (12) is completely 
dry. 

CARE AND CLEANING

•  Before cleaning the iron, make sure that it is 

turned off and has cooled completely. 

•  W ipe the iron’s outer surface with a damp 

cloth and then wipe dry. 

•  Sediment on the iron sole can be removed 

with a cloth soaked in vinegar-water solu-
tion. 

•  After removing sediment, polish the sole with 

a dry cloth. 

•  Do not use abrasive substances to clean the 

sole and body of the iron. 

•  Avoid touching the iron sole with sharp metal 

objects. 

STORAGE

•    Turn the temperature regulator (10) anticlock-

wise till MIN position, set the steam release 

regulator (3) to the steam OFF position. 

•  Remove the power plug from the outlet. 
•  Open the water tank lid (2), turn over the iron 

and drain any remaining water from the water 
tank (11) (pic. 8).

•  Close the lid (2).
•  Set the iron vertically and allow it to cool com-

pletely. 

•  Store the iron vertically in a dry coo, place out 

of the reach of children.

Delivery set

1.  Iron – 1 pc.
2.  Water bowl – 1pc.

TECHNICAL CHARACTERISTICS

Power requirements: 220V -240 V~ 50/60 Hz
Power consumption: 1680-2000 W

Specifications subject to change without prior 
notice.

Service life of  appliance -  3 years

GUARANTEE

Details regarding guarantee conditions can be 
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt 
must be produced when making any claim 
under the terms of this guarantee.

This product conforms to the EMC-
Requirements as laid down by the 
Council Directiv e 89/336/EEC 
and to the Law Voltage Regulation 
(73/23 EEC)

1255.indd   7

1255.indd   7

03.03.2010   15:40:15

03.03.2010   15:40:15