VITEK VT-1255 VT - Инструкция по эксплуатации - Страница 6

6

 ENGLISH

•  When the sole temperature (12) reaches the 

desired temperature value, the (9) indicator 
will go out, you can start ironing.

Note: While steam ironing set the tempera-
ture to steam using zone or “•••”.

WATER SPRAYER 

•  You can dampen the fabric by pressing the 

spray button (4) several times (pic.4).

•  Make sure that there is enough water in the 

water tank (11). 

IRONING 

•  Place the iron on the base (8).
•  Insert the power plug into the outlet.
•  Set the temperature regulator (10) to the re-

quired ironing temperature: “

•

”, “

••

”, “

•••

” 

(depending on the type of fabric), the (9) in-
dicator will light up (Pic.3). 

•  When the sole temperature (12) reaches the 

desired temperature value, the (9) indicator 
will go out, you can start ironing.

•  After you finish ironing set the (10) regulator 

to the 

“

MIN

” position

.

•  Pull the plug out of the socket and let the iron 

cool down completely.  

STEAM IRONING

For steam ironing set the temperature regula-
tor to steam using zone or “

•••

”.The iron has 

an anti-drop valve, which stops water supply, 
when the sole temperature is too low it prevents 
the appearance of drops out of the sole open-
ings (12). While heating or cooling down of the 
sole (12), you will hear clicks of opening/clos-
ing of the anti-drop valve it means that the valve 
works normally.
•  Place the iron on the base (8).
•  Insert the power plug into the outlet.
•  Make sure that there is enough water in the 

water tank (11), the indicator (9) is not light-
ing.

•  Set the temperature regulator (10) to the re-

quired ironing temperature: to steam using 
zone or “

•••

”. (depending on the type of 

fabric), the (9) indicator will light up (Pic.3). 

•  When the sole temperature (12) reaches the 

desired temperature value, the (9) indicator 
will go out, you can start ironing.

•  Turn the steam supply regulator (3) to set the 

intensity of steaming, steam will start outgo-
ing from the openings of the sole (12).

•  After you finish ironing set the (10) regulator 

to the 

“

MIN

” position 

and the steam supply 

regulator (3) to the off position

.

•  Pull the plug out of the socket and let the iron 

cool down completely.  

AT TENTION!

If during the operation steam is not constantly 
supplied, check whether the temperature regu-
lator (10) is set properly and whether there is 
water in the reservoir.

ADDITIONAL STEAM RELEASE

Additional steam release function is useful 
when ironing folds and can only be used at high 
ironing temperatures (when the iron tempera-
ture regulator (10) is set to “

•••

”).

When the additional steam release button (5) is 
pressed, steam will be vigorously released from 
the openings in the iron sole (pic.5).

Note: In order to avoid leakage of water from 
steam openings, press the additional steam 
supply button (5) with 4-5 sec. interval.

VERTICAL STEAMING

For vertical steaming can be used only when 
the high temperature mode is used (set the 
temperature regulator (10) to «

•••

»).

•  Hold the iron vertically at the distance 15-

30 cm from the clothes  press the additional 
steam release button (5) with 4-5 seconds 
interval, steam will be released from the 
openings in the iron sole (12) (pic. 6).

Important information

•  Vertical steaming is not recommended for 

synthetic fabrics. 

•  To avoid melting the fabric, do not touch the 

iron sole to the item while steaming. 

•  Never steam iron clothing that is being worn 

as the steam temperature is very high and 
it can cause burns. Use a coat-hanger or a 
stand.

STEAM CHAMBER CLEANING

To prolong lifetime of the iron we recommend 
cleaning the steam chamber, especially in the 
regions with “hard” water.

1255.indd   6

1255.indd   6

03.03.2010   15:40:15

03.03.2010   15:40:15