VITEK VT-1255 VT - Инструкция по эксплуатации - Страница 4

4

STEAM IRON

DESCRIPTION

1 –  Water spray nozzle
2 –  Water tank lid
3 – Steam supply regulator / SELF CLEAN 

mode

4 -   Spray button
5 -   Additional steam release button
6 –  Handle
7 –  Power cord protection
8 –  Iron base
9 –  Heating element on/off indicator
10 – Temperature regulator
11 -  Water reservoir
12 -  Iron sole
13 -  Maximal water level indication
14 – Water bowl

SAFETY MEASURES
Before using the unit, please read the in-
structions carefully and pay attention to 
the illustrations. 

•  Before switching on the unit, make sure that 

your home electricity supply corresponds to 
the voltage of current specified on the unit.

• Power cord is equipped with a euro plug; 

insert it into the socket, with secure ground-
ing.  

•  In order to avoid risk of fire do not use adapt-

ers while connecting the appliance to the 
outlet.

•  In order to avoid overloading of the power net-

work do not switch on several appliances with 
high power consumption simultaneously.

•  Use the unit only for the intended purposes.
•  Use the iron only on the ironing board.
•  Place the iron on a flat stable surface.
•  Always unplug the unit while filling the water 

tank with water.

•  While operating the unit, provide that the wa-

ter tank lid is firmly closed 

•  Close supervision is necessary when chil-

dren or disabled persons are near the unit.

•  Never leave the operating unit unattended.
•  Always unplug the unit if you do not use it.
•  In order to avoid electric shock do not im-

merse the unit into water or other liquids.

•  Do not fill the water tank with scented liquids, 

vinegar, starch solution, descaling reagents, 
chemical agents etc.

•  Avoid contact with hot surfaces or outgoing 

steam of the iron in order to avoid getting 
burns.

•  Provide that the power cord is not hanging 

over the edge of the ironing board and make 
sure that it does not touch heated surfaces.

•  To unplug the unit always take it by the plug, 

do not pull by the power cord.

•  Before taking the unit away for keeping, pour 

out the remaining water and let the unit cool 
down.

•  Pour out water only after you have unplugged 

the unit.

•  Do not use the unit if the plug or the power 

cord is damaged or if there are other dam-
ages in the unit. 

•  In order to avoid electric shock do not repair 

the unit yourself. If there are some damages 
in the unit apply to the authorized service 
center.

•  The iron must be used and rested on a stable 

surface.

•  The iron must be used and rested on a stable 

surface

• When placing the iron on its stand, ensure 

that the surface on which the stand is placed 
is stable.

• The iron is not to be used if it has been 

dropped, if there are visible signs of damage 
or if it is leaking.

•  Keep electrical appliances out of reach from 

Children or infirm persons. Do not let them 
use the appliances without supervision.

•  The user must not leave the iron unattended 

while it is connected to the supply.

• If the supply cord is damaged, it must be 

replaced by the manufacturer, its service 
agent or a similarly qualified person in order 
to avoid a hazard.

•  The plug of the supply cord must be removed 

from the socket-outlet before the water res-
ervoir is filled with water

•  The filling aperture must not be opened dur-

ing use. Instructions for the safe refilling of 
the water reservoir shall be given.

• The iron must only be used with the stand 

provided.

•  This appliance is not intended for use by per-

sons (including children) with reduced physi-
cal, sensory or mental capabilities, or lack 
of experience and knowledge, unless they 

 ENGLISH

1255.indd   4

1255.indd   4

03.03.2010   15:40:15

03.03.2010   15:40:15