Усилители Pioneer VSX-520 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Listening to your system
05
33
En
English
Français
Español
Using Stream Direct
Use the Stream Direct modes when you want
to hear the truest possible reproduction of a
source. All unnecessary signal processing is
bypassed.
•
While listening to a source, press AUTO/
DIRECT to select Stream Direct mode.
•
AUTO SURROUND
– See
Auto playback
on
page 30.
•
DIRECT
– Sources are heard according to
the settings made in the Surround Setup
(speaker setting, channel level, speaker
distance), as well as with dual mono
settings.
1
You will hear sources according
to the number of channels in the signal.
•
PURE DIRECT
– Analog and PCM sources
are heard without any digital processing.
Using the Sound Retriever
When audio data is removed during the
compression process, sound quality often
suffers from an uneven sound image. The
Sound Retriever feature employs new DSP
technology that helps bring CD quality sound
back to compressed 2-channel audio by
restoring sound pressure and smoothing
jagged artifacts left over after compression.
2
•
Press S.RETRIEVER to switch the sound
retriever on or off.
Better sound using Phase
Control
This receiver’s Phase Control feature uses
phase correction measures to make sure your
sound source arrives at the listening position
in phase, preventing unwanted distortion and/
or coloring of the sound (see illustration
below).
During multichannel playback, LFE (Low-
Frequency Effects) signals as well as low-
frequency signals in each channel are
assigned to the subwoofer or other the
subwoofer and the most appropriate speaker.
At least in theory, however, this type of
processing involves a group delay that varies
with frequency, resulting in phase distortion
where the low-frequency sound is delayed or
muffled by the conflict with other channels.
With the Phase Control mode switched on, this
receiver can reproduce powerful bass sound
without deteriorating the quality of the original
sound (see illustration below).
Note
1 In the
DIRECT
mode, Phase Control, Sound Delay, Auto Delay, LFE Attenuate and Center image functions are available.
2 The Sound Retriever is only applicable to 2-channel sources.
AUTO/
DIRECT
BD MENU
STANDARD ADV SURR
STEREO/
A.L.C.
ADAPTER
TUNER
EQ
PHASE
S.RETRIEVER
SIGNAL SEL
VOL
?
Sound
source
Sound
source
L i s t e n i n g
p o s i t i o n
L i s t e n i n g
p o s i t i o n
Front speaker
Subwoofer
Front speaker
Subwoofer
P
H
A
S
E
C
O
N
T
R
O
L
O
F
F
P
H
A
S
E
C
O
N
T
R
O
L
O
N
VSX-520_SYXCN_En.book 33 ページ
年４月
日 月曜日 午後７時
分
