Makita EM2600U - Инструкция по эксплуатации - Страница 4

4

– Start the brush cutter/string trimmer only in accordance with the instructions. 

Do not use any other methods to start the engine!

– Only use the brush cutter/string trimmer and tools for the specified purposes.
– Only start the brush cutter/string trimmer engine after the equipment is fully 

assembled. Do not operate the equipment until all of the appropriate 
accessories are attached!

– Before starting, make sure that the cutting tool is not in contact with hard objects 

such as branches, stones etc. as the cutting tool will rotate when starting.

– Switch off the engine immediately if any type of engine problem occurs.
– Should the cutting tool hit stones or other hard objects, immediately switch off 

the engine and inspect the cutting tool.

– Inspect the cutting tool at short regular intervals for damage (inspect for 

hairline cracks using the tapping test).

– Only operate the brush cutter/string trimmer after attaching and adjusting the 

shoulder strap to the correct length. The shoulder strap must be adjusted to 
the user’s size and fastened to prevent fatigue during operation of the 
equipment. Never hold the cutter with one hand during operation.

– During operation, always hold the brush cutter/string trimmer with both hands. 

Always ensure you are on safe footing.

– Operate the brush cutter/string trimmer in such a manner as to avoid 

inhalation of the exhaust gases. Never run the engine in an enclosed space 
such as inside a room (risk of gas poisoning). Carbon monoxide is an odorless 
gas.

– Always switch off the engine when resting, or if you intend to leave the brush 

cutter/string trimmer unattended, and place it in a safe location to prevent 
injury to other people and damage to the equipment.

– Never put the hot brush cutter/string trimmer onto dry grass or onto any other 

combustible materials.

– The cutting tool must always be equipped with the appropriate guard. 

Never run the cutter without this guard!

– All protective installations and guards supplied with the equipment must be 

used during operation.

– Never operate the engine if the exhaust muffler is faulty.
– Shut off the engine during transport.
– When transporting the equipment, always attach the cover to the cutting 

blade.

– Ensure the brush cutter/string trimmer is positioned safely during transport to 

avoid fuel leakage.

– When transporting the brush cutter/string trimmer, ensure the fuel tank is 

completely empty.

– When unloading the brush cutter/string trimmer from a truck or other such 

vehicle, never drop the engine to the ground, as doing so may severely 
damage the fuel tank.

– Unless in an emergency, never drop or cast the brush cutter/string trimmer to 

the ground as doing so may severely damage the brush cutter/string trimmer.

– Always lift the entire equipment from the ground when moving it. Dragging the 

equipment on its fuel tank is extremely dangerous and may cause fuel to leak, 
which may cause fire.

– If the equipment gets heavy impact or fall, check the condition before 

continuing work. Check the fuel system for fuel leakage and the controls and 
safety devices for malfunction. If there is any damage or doubt, ask our 
authorized service center for the inspection and repair.

Refuelling

– Shut off the engine during refuelling, keep away from open flames and do not 

smoke during refuelling.

– Ensure mineral oil products do not come into contact with skin. Do not inhale 

the fuel vapor. Always wear protective gloves during refuelling. Change and 
clean protective clothing at regular intervals.

– To prevent soil contamination (environmental protection), make sure you do 

not spill fuel or oil on the ground. If you do spill fuel, clean the brush cutter/
string trimmer immediately.

– Make sure fuel does not come into contact with your clothing. If fuel does 

come into contact with your clothing, change your clothing immediately to 
prevent fire.

– Inspect the fuel cap at regular intervals to make sure that it can be securely 

fastened and does not leak.

– Carefully tighten the fuel tank cap. Once refuelling is complete, move to a 

location at least 3 meters away from where you refuelled before starting the 
engine.

– Never refuel in an enclosed space such as inside a room. Doing so may cause 

an explosion due to the accumulation of fuel vapor at ground level.

• Resting
• Transport
• Refuelling
• Maintenance
• Tool Replacement