Makita EM2600U - Инструкция по эксплуатации - Страница 10

10

For loop handle model

– Put the thread (1) on handle holder into the location hole (2) on tube.
– Fix the assistant handle (3) onto the barrier.
– Tighten the 4 bolts (4) M5 x 30.

To meet the applicable safety standards, you must only use the tool/protector 
combinations indicated in the table.

Always use genuine MAKITA cutter blades/nylon cutting head.

– The cutter blade must be well polished, and free of cracks or breakages. If the 

cutter blade hits against a stone during operation, stop the engine and check 
the blade immediately.

– Polish or replace the cutter blade every three hours of operation.
– If the nylon cutting head hits against a stone during operation, stop the engine 

and check the nylon cutting head immediately.

CAUTION: The appropriate protectors must always be installed for your own 

safety and in order to comply with accident-prevention regulations. 
Operation of the equipment without the guard installed is prohibited.

– Fix the protector (1) to the clamp (3) with two M6 x 30 bolts (2).

– When using the string head, fit the protector (6) into the protector (1), and 

tighten them with two nuts (5) and two screws (4).

Mounting the protector

(2)

(1)

Engine

(4)

(3)

Engine

EM2600L

Star Blade

Protector for metal blades

Nylon cutting head

Protector for cord cutter

(2)

(3)

(1)

(4)

(1)

(6)

(5)