Makita DUR190LZX3 - Инструкция по эксплуатации - Страница 23

23 ENGLISH

TROUBLESHOOTING

Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual, 

do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using Makita replace-

ment parts for repairs.

State of abnormality

Probable cause (malfunction)

Remedy

Motor does not run.

Battery cartridge is not installed.

Install the battery cartridge.

Battery problem (under voltage)

Recharge the battery. If recharging is not effective, 

replace battery.

The drive system does not work 

correctly.

Ask your local authorized service center for repair.

Motor stops running after a little use. Battery's charge level is low.

Recharge the battery. If recharging is not effective, 

replace battery.

Overheating.

Stop using of tool to allow it to cool down.

It does not reach maximum RPM.

Battery is installed improperly.

Install the battery cartridge as described in this 

manual.

Battery power is dropping.

Recharge the battery. If recharging is not effective, 

replace battery.

The drive system does not work 

correctly.

Ask your local authorized service center for repair.

Cutting tool does not rotate: 

 stop the machine immediately!

Foreign object such as a branch is 

jammed between the guard and the 

cutting tool.

Remove the foreign object.

The drive system does not work 

correctly.

Ask your local authorized service center for repair.

Abnormal vibration: 

 stop the machine immediately!

One end of the nylon cord has been 

broken.

Tap the nylon cutting head against the ground while 

it is rotating to cause the cord to feed.

The drive system does not work 

correctly.

Ask your local authorized service center for repair.

Cutting tool and motor cannot stop: 

 Remove the battery immediately!

Electric or electronic malfunction.

Remove the battery and ask your local authorized 

service center for repair.

OPTIONAL ACCESSORIES

WARNING:

Only use the recommended 

accessories or attachments indicated in this man-

ual.

 The use of any other accessory or attachment 

may result in serious personal injury.

CAUTION:

These accessories or attachments 

are recommended for use with your Makita tool 

specified in this manual.

 The use of any other 

accessories or attachments might present a risk of 

injury to persons. Only use accessory or attachment 

for its stated purpose.

If you need any assistance for more details regard-

ing these accessories, ask your local Makita Service 

Center.
• 

Cutter blade

• 

Nylon cutting head

• 

Nylon cord (cutting line)

• 

Plastic blade

• 

Makita genuine battery and charger

NOTE:

 Some items in the list may be included in the 

tool package as standard accessories. They may 

differ from country to country.