Makita DUR190LZX3 - Инструкция по эксплуатации - Страница 17

17 ENGLISH

Maintenance

1. 

Have your tool serviced by our authorized service 

center, always using only genuine replacement parts.

Incorrect repair and poor maintenance can shorten the 

life of the tool and increase the risk of accidents.

2. 

Before doing any maintenance or repair work 

or cleaning the tool, always turn it off and 

remove the battery cartridge.

3. 

Always wear protective gloves when handling 

the cutting blade.

4. 

Always clean dust and dirt off the tool. Never 

use gasoline, benzine, thinner, alcohol or the 

like for the purpose.

 Discoloration, deformation 

or cracks of the plastic components may result.

5. 

After each use, tighten all screws and nuts.

6. 

Do not attempt any maintenance or repair not 

described in the instruction manual. Ask our 

authorized service center for such work.

7. 

Always use our genuine spare parts and accessories only.

Using parts or accessories supplied by a third party may result 

in the tool breakdown, property damage and/or serious injury.

8. 

Request our authorized service center to 

inspect and maintain the tool at regular interval.

9. 

Always keep the tool in good working condi-

tion.

 Poor maintenance can result in inferior per-

formance and shorten the life of the tool.

Storage

1. 

Before storing the tool, perform full cleaning 

and maintenance. Remove the battery car-

tridge. Attach the cover to the cutting blade.

2. 

Store the tool in a dry and high or locked loca-

tion out of reach of children.

3. 

Do not prop the tool against something, such 

as a wall.

 Otherwise it may fall suddenly and 

cause an injury.

First aid

1. 

Always have a first-aid kit close by. Immediately 

replace any item taken from the first aid kit.

2. 

When asking for help, give the following information:

—  Place of the accident
—  What happened

—  Number of injured persons
—  Nature of the injury

—  Your name

Important safety instructions for 

battery cartridge

1. 

Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery 

charger, (2) battery, and (3) product using battery.

2. 

Do not disassemble battery cartridge.

3. 

If operating time has become excessively 

shorter, stop operating immediately. It may 

result in a risk of overheating, possible burns 

and even an explosion.

4. 

If electrolyte gets into your eyes, rinse them 

out with clear water and seek medical atten-

tion right away. It may result in loss of your 

eyesight.

5. 

Do not short the battery cartridge:

(1) 

Do not touch the terminals with any con-

ductive material.

(2) 

Avoid storing battery cartridge in a con-

tainer with other metal objects such as 

nails, coins, etc.

(3) 

Do not expose battery cartridge to water 

or rain.

A battery short can cause a large current 

flow, overheating, possible burns and even a 

breakdown.

6. 

Do not store the tool and battery cartridge in 

locations where the temperature may reach or 

exceed 50 °C (122 °F).

7. 

Do not incinerate the battery cartridge even if 

it is severely damaged or is completely worn 

out. The battery cartridge can explode in a fire.

8. 

Be careful not to drop or strike battery.

9. 

Do not use a damaged battery.

10. 

The contained lithium-ion batteries are subject to 

the Dangerous Goods Legislation requirements. 

For commercial transports e.g. by third parties, 

forwarding agents, special requirement on pack-

aging and labeling must be observed. 

For preparation of the item being shipped, consult-

ing an expert for hazardous material is required. 

Please also observe possibly more detailed 

national regulations. 

Tape or mask off open contacts and pack up the 

battery in such a manner that it cannot move 

around in the packaging.

11. 

When disposing the battery cartridge, remove 

it from the tool and dispose of it in a safe 

place. Follow your local regulations relating to 

disposal of battery.

12. 

Use the batteries only with the products 

specified by Makita.

 Installing the batteries to 

non-compliant products may result in a fire, exces

-

sive heat, explosion, or leak of electrolyte.

13. 

If the tool is not used for a long period of time, 

the battery must be removed from the tool.

SAVE THESE INSTRUCTIONS.

CAUTION:

Only use genuine Makita batteries.

Use of non-genuine Makita batteries, or batteries that 

have been altered, may result in the battery bursting 

causing fires, personal injury and damage. It will 

also void the Makita warranty for the Makita tool and 

charger.

Tips for maintaining maximum 

battery life

1. 

Charge the battery cartridge before completely 

discharged. Always stop tool operation and 

charge the battery cartridge when you notice 

less tool power.

2. 

Never recharge a fully charged battery cartridge. 

Overcharging shortens the battery service life.

3. 

Charge the battery cartridge with room tempera-

ture at 10 °C - 40 °C (50 °F - 104 °F). Let a hot 

battery cartridge cool down before charging it.

4. 

Charge the battery cartridge if you do not use 

it for a long period (more than six months).