Makita DUR190LZX3 - Инструкция по эксплуатации - Страница 15

15 ENGLISH

3. 

Wear proper clothing and shoes for safe 

operation, such as a work overall and sturdy, 

non-slip shoes. Do not wear loose clothing or 

jewelry.

 Loose clothes, jewelry or long hair can be 

caught in moving parts.

4. 

When touching the cutting blade, wear protec-

tive gloves.

 Cutting blades can cut bare hands 

severely.

Work area safety

1. 

Operate the tool under good visibility and day-

light conditions only. Do not operate the tool in 

darkness or fog.

2. 

Do not operate the tool in explosive atmo-

spheres, such as in the presence of flammable 

liquids, gases or dust.

 The tool creates sparks 

which may ignite the dust or fumes.

3. 

During operation, never stand on an unstable 

or slippery surface or a steep slope. During 

the cold season, beware of ice and snow and 

always ensure secure footing.

4. 

During operation, keep bystanders or animals 

at least 15 m away from the tool. Stop the tool 

as soon as someone approaches.

5. 

Never operate the tool while people, especially 

children, or pets are nearby.

6. 

Before operation, examine the work area for 

stones or other solid objects.

 They can be 

thrown or cause dangerous kickback and result in 

serious injury and/or property damage.

7. 

WARNING: Use of this product can create 

dust containing chemicals which may cause 

respiratory or other illnesses. Some examples 

of these chemicals are compounds found in 

pesticides, insecticides, fertilizers and herbi-

cides. Your risk from these exposures varies, 

depending on how often you do this type 

of work. To reduce your exposure to these 

chemicals: work in a well ventilated area, and 

work with approved safety equipment, such as 

those dust masks that are specially designed 

to filter out microscopic particles.

Electrical and battery safety

1. 

Do not expose the tool to rain or wet condi-

tions.

 Water entering the tool will increase the risk 

of electric shock.

2. 

Do not use the tool if the switch does not 

turn it on and off.

 Any tool that cannot be con-

trolled with the switch is dangerous and must be 

repaired.

3. 

Prevent unintentional starting. Ensure the switch 

is in the off-position before installing a battery 

pack, picking up or carrying the tool.

 Carrying the 

tool with your finger on the switch or energising the 

tool that have the switch on invites accidents.

4. 

Do not dispose of the battery(ies) in a fire.

The cell may explode. Check with local codes for 

possible special disposal instructions.

5. 

Do not open or mutilate the battery(ies).

 Released 

electrolyte is corrosive and may cause damage to the 

eyes or skin. It may be toxic if swallowed.

6. 

Do not charge battery in rain, or in wet 

locations.

Putting into operation

1. 

Before assembling or adjusting the tool, 

remove the battery cartridge.

2. 

Before handling the cutter blade, wear protec-

tive gloves.

3. 

Before installing the battery cartridge, inspect 

the tool for damages, loose screws/nuts or 

improper assembly. Sharpen blunt cutter 

blade. If the cutter blade is bent or dam-

aged, replace it. Check all control levers and 

switches for easy action. Clean and dry the 

handles.

4. 

Never attempt to switch on the tool if it is dam-

aged or not fully assembled.

 Otherwise serious 

injury may result.

5. 

Adjust the shoulder harness and hand grip to 

suit the operator's body size.

6. 

When inserting a battery cartridge, keep the 

cutting attachment clear of your body and 

other object, including the ground.

 It may rotate 

when starting and may cause injury or damage to 

the tool and/or property.

7. 

Remove any adjusting key, wrench or blade 

cover before turning the tool on.

 An accessory 

left attached to a rotating part of the tool may 

result in personal injury.

8. 

The cutting tool has to be equipped with the 

guard. Never run the tool with damaged guards 

or without guards in place!

9. 

Make sure there are no electrical cables, water 

pipes, gas pipes etc. that could cause a hazard 

if damaged by use of the tool.

Operation

1. 

In the event of an emergency, switch off the 

tool immediately.

2. 

If you feel any unusual condition (e.g. noise, 

vibration) during operation, switch off the 

tool and remove the battery cartridge. Do not 

use the tool until the cause is recognized and 

solved.

3. 

The cutting attachment continues to rotate for 

a short period after turning the tool off. Don't 

rush to contact the cutting attachment.

4. 

During operation, use the shoulder harness. 

Keep the tool on your right side firmly.

5. 

Do not overreach. Keep proper footing and 

balance at all times. Watch for hidden obsta-

cles such as tree stumps, roots and ditches to 

avoid stumbling.

6. 

Always be sure of your footing on slopes.

7. 

Walk, never run.

8. 

Never work on a ladder or tree to avoid loss of 

control.

9. 

If the tool gets heavy impact or fall, check the 

condition before continuing work. Check the 

controls and safety devices for malfunction. If 

there is any damage or doubt, ask our autho-

rized service center for the inspection and 

repair.

10. 

Take a rest to prevent loss of control caused 

by fatigue.

 We recommend taking a 10 to 20-min-

ute rest every hour.