Husqvarna 129R 9671933-01 - Инструкция по эксплуатации - Страница 9

H

Harness release function

WARNING: Do not use the harness if the

release function is defective. Make sure that

the harness release function operates

correctly when you adjust the product.

The harness release function is at the front of the

product. The harness straps must always stay at the

correct position (Picture 23). In an emergency, the

harness release function helps you to safely release

from the product.

Muffler

• Do not use an engine with a damaged muffler. A

damaged muffler increases the noise level and the

risk of fire. Keep a fire extinguisher near.

• Examine regularly that the muffler is attached to the

product.

• Do not touch the engine or the muffler when then

engine is on. Do not touch the engine or the muffler

for a while after the engine stops. Hot surfaces can

cause injuries.

• A hot muffler can cause a fire. Be careful, if you use

the product near flammable liquids or fumes.

• Do not touch the parts in the muffler, if the muffler is

damaged. The parts can contain some carcinogenic

chemicals.

Locknut

The locknut is used to lock some types of cutting

attachment (Picture 24).
When you install the locknut, tighten it in the opposite

direction to operation direction of the cutting attachment.

Cutting attachment

• Do the regular maintenance. Let an approved

service center regularly examine the cutting

attachment to do adjustments or repairs.
• The performance of the cutting attachment

increases.

• The life of the cutting attachment increases.
• The risk of accidents decreases.

• Only use an approved cutting attachment guard. For

more information, see 

#.

• Do not use a damaged cutting attachment.

Grass trimmer head

• Make sure that you wind the grass trimmer line

tightly and equally around the drum to decrease the

vibration.

• Use only the approved grass trimmer heads and

grass trimmer lines. See 

#.

• Use a correct length of the grass trimmer line. A long

grass trimmer line uses more engine power than a

short grass trimmer line.

• Make sure that the cutter on the cutting attachment

guard is not damaged.

• Soak the grass trimmer line in water for 2 days

before you attach the grass trimmer line to the

product. This increases the life of the grass trimmer

line.

Grass blades and grass cutters

• Use the product with an approved grass blade. Do

not use a grass blade without proper installation of

all required parts. Make sure that the installation is

done correctly and that the proper parts are used.

Inproper installation may cause the blade to fly off

and seriously injure the operator or the bystanders.

• Wear protective gloves when you handle or do

maintenance on the blade.

• Use head protection when you operate a product

with a grass blade.

• Grass blades and grass cutters are used to cut

rough grass.

• A grass blade can cause injury while it continues to

spin after the engine is stopped or the throttle trigger

is released. Make sure that the grass blade has

completely stopped rotating before any

maintenance.

• Stop the engine before you do work on the cutting

attachment. Make sure the cutting attachment fully

stops. Disconnect the lead from the spark plug.

• Only use an approved cutting attachment or a

correctly sharpened blade.

• Keep the teeth of the blade correctly sharpened

(Picture 48).

• Do not use a damaged cutting attachment.
• Attach the transport guard to the grass blade when

you transport or store the product.

Blade thrust

• A blade thrust is a sudden movement of the product

to the side, forward or rearward. A blade thrust

occurs when the grass blade or saw blade hits an

object that cannot be cut. In areas where it is not

easy to see the material being cut the risk of blade

thrust increases.

• When a blade thrust occurs, there is a risk that the

product or the operator moves out of position. A

blade that moves can hit bystanders and there is a

risk of injuries.

• If a blade is bent, has cracks, is broken or damaged,

discard the blade.

• Use a sharp blade. The risk of blade thrust increases

when a blade is not sharp.

Fuel safety

• Do not start the product if there is fuel or engine oil

on the product. Remove the unwanted fuel/oil and let

the product dry. Remove unwanted fuel from the

product.

191 - 002 - 

9