Телефоны Samsung SCH N391 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
101
D
Diis
sp
plla
ay
y
100
D
Diis
sp
plla
ay
y
Dual Clock
MENU 7-5
You can choose two time zones to be displayed when
you select
Dual Clock
for the wallpaper image; for
details, see page 99.
To select time zones for the dual clock:
1. When
Location
highlights, press the
key.
2. Select the time zone for the first clock by pressing
the
or
key and press the
key.
3. Select the time zone for the second clock by
pressing
the or key.
4. Press the
OK
key to confirm the selection.
5. To set the DST (Daylight Saving Time), see below.
To exit, press the
CLR
or key.
To apply the daylight saving time:
1. When
Location
highlights,
press
the or key
to
display
DST
. Press the
key.
2. Select
Yes
to use the daylight saving time for the
first clock. Otherwise, select
No
.
3. Press the
key and repeat step 2 for the second
clock.
4. Press the
OK
key to confirm the selection.
Backlight
MENU 7-3
You have several options for setting how the LCD
backlight operates. Remember that backlight use
drains your battery faster.
The following options are available:
30 seconds
: The backlight switches on when you
press a key and switches off 30 seconds after that.
Then the display turns off after 30 seconds. If you set
the
Power Saving
menu (
MENU 7-8
) to Enable, the
display turns off after 30.
8 seconds
: The backlight switches on when you press
a key and switches off 8 seconds after that. Then the
display turns off after 52 seconds. If you set the
Power Saving
menu (
MENU 7-8
) to Enable, the
display turns off after 52.
Banner
MENU 7-4
This menu allows you to set a banner message to be
displayed at the bottom of the display in Standby
mode.
1. If necessary, press the
key to delete each
letter of the old banner. Press and hold the
key to clear the display.
2. Enter your banner message. For further details about
how to enter characters, see page 41.
3. When you finish entering the message, press the
OK
key to save the new banner.
