Телефоны Samsung SCH-A302 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

49
48
S
S o
o u
u n
n d
d s
s
Alerts
Menu 3-3
Minute Beep:
With this menu option set to
ON
, the
phone sounds an alert 10 seconds before
each elapsed minute to remind you of
the length of the current call.
Service Alert:
With this menu option set to
ON
, the
phone beeps when you exit service area
or when you return to a service area.
Connect:
You can set your phone to sound the connect
tone when your call is connected to the
system.
Disconnect:
You can set your phone to sound the
connect tone when a call is disconnected
or dropped.
Alarm
Menu 3-4
The option allows you to set up to three alarm to ring at
a specific time.
Keep in mind that if your phone is off at the alarm set
time, the alarm will not sound.
Note
: In order to the alarm to work, the phone must
be on and obtain the time information from the
service system.
S
S o
o u
u n
n d
d s
s
To set the alarm, proceed as follows.
1. Select the desired one of three alarm cell by pressing
or and then press .
2. Choose the alarm frequency option, and press .
Daily
: the alarm rings every day at the same time.
One Time
: the alarm rings only once and is then
deactivated.
3. Enter the required date and time using the number
keys.
The date setting is unavailable only for a Daily alarm.
Note
: You must enter the time in 24-hour format.
4. Press to save the alarm setting.
To stop the alarm when it rings, simply open/close the
phone or press any key.
Once you have set an alarm, press to access the
alarm setting. The following options are available.
Edit
: allows you to change the alarm frequency or time
and date for the alarm.
Release
: removes the alarm setting.
Exit
: exits the alarm menu option.












