Makita DVC864LZ - Инструкция по эксплуатации - Страница 8

8 ENGLISH

Ni-MH

Li-ion

Only for EU countries 

Do not dispose of electric equipment or 

battery pack together with household 

waste material! In observance of the 

European Directives, on Waste Electric 

and Electronic Equipment and Batteries 

and Accumulators and Waste Batteries and 

Accumulators and their implementation 

in accordance with national laws, electric 

equipment and batteries and battery 

pack(s) that have reached the end of 

their life must be collected separately and 

returned to an environmentally compatible 

recycling facility.

Intended use

The tool is intended for collecting dry dust. The tool 

is suitable for commercial use, for example in hotels, 

schools, hospitals, factories, shops, offices and rental 

businesses.

Noise

The typical A-weighted noise level determined accord-

ing to EN60335:

Sound pressure level (L

pA

) : 70 dB(A) or less

Uncertainty (K) : 2.5 dB(A)
The noise level under working may exceed 80 dB (A).

WARNING:

Wear ear protection.

Vibration

The vibration total value (tri-axial vector sum) deter

-

mined according to EN60335:

Vibration emission (a

h,M

) : 2.5 m/s

2

 or less

Uncertainty (K) : 1.5 m/s

2

NOTE:

 The declared vibration emission value has 

been measured in accordance with the standard test 

method and may be used for comparing one tool with 

another.

NOTE:

 The declared vibration emission value 

may also be used in a preliminary assessment of 

exposure.

WARNING:

 The vibration emission during actual 

use of the power tool can differ from the declared 

emission value depending on the ways in which the 

tool is used.

WARNING:

 Be sure to identify safety measures 

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking 

account of all parts of the operating cycle such as 

the times when the tool is switched off and when it is 

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A 

to this instruction manual.

SAFETY WARNINGS

Cordless vacuum cleaner safety 

warnings

WARNING:

IMPORTANT! READ CAREFULLY 

all safety warnings and all instructions BEFORE 

USE.

 Failure to follow the warnings and instructions 

may result in electric shock, fire and/or serious injury.

1. 

Before use, make sure that this cleaner must 

be used by people who have been adequately 

instructed on the use of this cleaner.

2. 

Do not use the cleaner without the filter. 

Replace a damaged filter immediately.

3. 

AVOID UNINTENTIONAL STARTING. Be sure 

switch is OFF when installing battery (ies).

4. 

Do not attempt to pick up flammable materials, 

fire works, lighted cigarettes, hot ashes, hot 

metal chips, sharp materials such as razors, 

needles, broken glass or the like.

5. 

NEVER USE THE CLEANER IN THE VICINITY 

OF GASOLINE, GAS, PAINT, ADHESIVES OR 

OTHER HIGHLY EXPLOSIVE SUBSTANCES. 

The switch emits sparks when turned ON and 

OFF. And so does the motor commutator during 

operation. A dangerous explosion may result.

6. 

Never vacuum up toxic, carcinogenic, com-

bustible or other hazardous materials such as 

asbestos, arsenic, barium, beryllium, lead, pes-

ticides, or other health endangering materials.

7. 

Never use the cleaner outdoors in the rain.

8. 

Do not use close to heat sources (stoves, etc.).

9. 

Do not block cooling vents. These vents per-

mit cooling of the motor. Blockage should be 

carefully avoided otherwise the motor will burn 

out from lack of ventilation.

10. 

Keep proper footing and balance at all times.

11. 

Do not fold, tug or step on the hose.

12. 

Stop the cleaner immediately if you notice poor per-

formance or anything abnormal during operation.

13. 

REMOVE THE BATTERY(IES). When not in use, 

before servicing, and when changing accessories.

14. 

Clean and service the cleaner immediately after 

each use to keep it in tiptop operating condition.

15. 

MAINTAIN THE CLEANER WITH CARE. Keep the 

cleaner clean for better and safer performance. 

Follow instructions for changing accessories. Keep 

handles dry, clean, and free from oil and grease.

16. 

CHECK DAMAGED PARTS. Before further use of 

the cleaner, a guard or other part that is damaged 

should be carefully checked to determine that it will 

operate properly and perform its intended function. 

Check for alignment of moving parts, binding of 

moving parts, breakage of parts, mounting, and 

any other conditions that may affect its operation. 

A guard or other part that is damaged should be 

properly repaired or replaced by an authorized ser-

vice center unless otherwise indicated elsewhere 

in this instruction manual. Have defective switches 

replaced by authorized service center. Don’t use 

the cleaner if switch does not turn it on and off.