Makita DVC864LZ - Инструкция по эксплуатации - Страница 10

10 ENGLISH

CAUTION:

Only use genuine Makita batteries.

Use of non-genuine Makita batteries, or batteries that 

have been altered, may result in the battery bursting 

causing fires, personal injury and damage. It will 

also void the Makita warranty for the Makita tool and 

charger.

Tips for maintaining maximum 

battery life

1. 

Charge the battery cartridge before completely 

discharged. Always stop tool operation and 

charge the battery cartridge when you notice 

less tool power.

2. 

Never recharge a fully charged battery car-

tridge. Overcharging shortens the battery 

service life.

3. 

Charge the battery cartridge with room tem-

perature at 10 °C - 40 °C (50 °F - 104 °F). Let 

a hot battery cartridge cool down before 

charging it.

4. 

Charge the battery cartridge if you do not use 

it for a long period (more than six months). 

Important safety instructions for 

wireless unit

1. 

Do not disassemble or tamper with the cleaner. 

The wireless unit in the cleaner cannot be 

removed.

2. 

Do not operate the wireless activation function 

in places where medical instruments, heart 

pace makers, or automated devices, such as 

automatic doors and fire alarms, are nearby.

3. 

Do not use the cleaner in places where the 

temperature exceeds 50°C (122°F).

4. 

The wireless unit is an accurate instrument. Be 

careful not to drop or strike the cleaner.

5. 

Do not leave the cleaner in a place where 

static electricity or electrical noise could be 

generated.

FUNCTIONAL 

DESCRIPTION

CAUTION:

Always be sure that the tool is 

switched off and the battery cartridge is removed 

before adjusting or checking function on the tool.

Installing or removing battery 

cartridge

CAUTION:

Always switch off the tool before 

installing or removing of the battery cartridge.

CAUTION:

Hold the tool and the battery car-

tridge firmly when installing or removing battery 

cartridge.

 Failure to hold the tool and the battery 

cartridge firmly may cause them to slip off your hands 

and result in damage to the tool and battery cartridge 

and a personal injury.

CAUTION:

Be careful not to pinch your fin

-

gers when opening or closing the battery cover.

Failure to do so may cause personal injury.

To install the battery cartridge, release the lock first, 

and open the battery cover. And then, insert the battery 

cartridge.

► 

Fig.1:

1.

 Lock 

2.

 Battery cover

Align the tongue on the battery cartridge with the groove 

in the housing and slip it into place. Insert it all the way 

until it locks in place with a little click. Then lock the 

battery cover.

► 

Fig.2:

1.

 Battery cartridge

To remove the battery cartridge, slide it from the tool 

while sliding the button on the front of the cartridge.

CAUTION:

Always install the battery cartridge 

fully until the red indicator cannot be seen.

 If not, 

it may accidentally fall out of the tool, causing injury to 

you or someone around you.

CAUTION:

Do not install the battery cartridge 

forcibly.

 If the cartridge does not slide in easily, it is 

not being inserted correctly.

NOTE:

 The cleaner does not work with only one 

battery cartridge.

Indicating the remaining battery 

capacity

Only for battery cartridges with the indicator

► 

Fig.3:

1.

 Indicator lamps 

2.

 Check button

Press the check button on the battery cartridge to indi-

cate the remaining battery capacity. The indicator lamps 

light up for a few seconds.