ARDESTOBright SWMG-7120W - Инструкция по эксплуатации - Страница 57

EN

TROUBLESHOOTING GUIDE

Problem

Error Code

Possible Cause

Solutions

The water of machine 

fills overtime.

1.

Water tap is not open.

2.

Drain hose is put down.

3.

Water inlet valve is 

damaged.

1.

Open the water tap.

2.

Hook up the hose.

3.

Change the water inlet valve.

There is a Door lock 

alarm.

1.

The door is not locked 

well.

2.

Garments is caught 

between the door and 

seal.

3.

Door lock is damaged.

1.

Lock the door well.

2.

Put the garment into the 

drum.

3.

Change the door lock.

The machine drains 

overtime.

1.

The drain hose is 

squashed or kinked.

2.

The drain pump filter is 

block. 

3.

The drainage system 

pipes are blocked.

1.

Check the drain hose.

2.

Clean the filter.

3.

Check the drainage system 

and clean it.

Water overflows the 

machine. / Water sensor 

works abnormal.

1.

The water inlet valve is 

damaged.

2.

The connection between 

the water sensor and 

wire is not secure.

3.

The water sensor is 

damaged.

1.

Change the water inlet.

2.

Check the connection and 

ensure it is secure.

3.

Change the water sensor.

The motor does not 

work.

1.

The connection between 

the motor and wire is not 

secure.

2.

The motor is protected 

because of over-heat.

3. The motor is damaged.

1.

Check the connection and 

ensure it is secure.

2.

Check if the machine is 

overloaded. Switch off the 

machine, and retry when the 

motor becomes cool.

3.

Change the motor.

There is a heater fault.

1.

The connection between 

the heater and wire is 

not secure.

2.

The heater is damaged.

1.

Check the connection and 

ensure it is secure.

2.

Change the heater.

There is a temperature

sensor fault.

1.

The connection between 

the heater and wire is 

not secure.

2.

The temperature sensor 

is damaged.

1.

Check the connection and 

ensure it is secure.

2.

Change the temperature 

sensor.

57