ARDESTOBright SWMG-7120W - Инструкция по эксплуатации - Страница 56

EN

Cleaning the drain pump filter

IMPORTANT:

 If the machine is exposed to temperatures below 0°C, certain 

precautionsshould be taken.

1. 

Disconnect the machine 

from the mains 

electricity supply and 

open the lower cover 

with a screwdriver.

2. 

Place a container under 

the pump.Unscrew and 

remove the filter.

3. 

Clean the filter carefully.

Note. The filter should be cleaned every 2 months or when there is 

fault that  the «E03» is on the screen.

IMPORTANT:

If the machine is exposed to temperatures below 0°C, certain 

precautions should be taken.

1.  Turn off the water tap.

2.  Unscrew the inlet hose.

3.  Unhook the drain hose from the rear support and position the 

end of this hose and that of the inlet hose in a bowl. Run the spin 

programme.

4.  Disconnect the appliance.

5.  Screw the inlet hose and reposition the drain hose.

6.  When you intend to start the machine up again, make sure that 

the room temperature is above 0 °C.

56