AL-KO SNOWLINE 560 II - Инструкция по эксплуатации - Страница 28

GB

Translation of original user instructions

28

AL-KO snow blower

▪

If the skid plates are worn (sliding edge  

(  

24-1

)

worn through, turn 180° and use 

the other side (  

24

).

▪ See the replacement parts list when ordering 

replacements.

Checking the tyre pressure

Check the tyre pressure before the first use in winter and 

then at least once every three months during the period 

of use.

The  maximum  allowed  tyre  pressure  is  indicated  on 

the tyres (  

20-1

)

. Note: 1 bar = approximately 14.5 psi

Inspecting the machine

Each  time  before  starting,  check  to  make  sure  that  the 

four shear pins (  

25-1

) are intact.

Replace  broken  shear  pins  with  original  replacement 

parts. Using unauthorised replacement parts may cause 

severe  damage  to  the  machine!  See  the  replacement 

parts list when ordering replacements.

Check all controls, safety devices, nuts, screws and bolts 

on the machine to make sure that they are firmly secured 

and in good condition, and and that no parts are missing.

Starting the engine

Danger - risk of poisoning!

Never leave the engine running in an enclosed 

space.

Position indicators:

Choke

CLOSE       OPEN
Gas

Fast            Slow

Engine key

Off                 On

Fuel tap   Closed

                   Open

Primer button

Starting procedure

1.  Check the oil and fuel levels.
2.  Open the fuel tap  (  

27

).

3.  Set the choke to ON (  

27-1

).

4. 

Press the primer button 3 times at 2-second inter

-

vals(  

28-1

). In temperatures under 10 °C, press 

the primer button 5 times

.

5.  Move the throttle to the Fast position (  

29

).

6.  Insert the engine key (  

30-1

).

„

Starting manually:

7.  Pull the starter rope lightly until you feel resistance, 

then pull out briskly and allow the rope to return 

slowly (  31).