DEWALT DCD996NT - Инструкция по эксплуатации - Страница 7

5

English

SAVE ALL WARNINGS AND INSTRUCTIONS  

FOR FUTURE REFERENCE

The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless) 
power tool.

1)  Work area safety

a ) 

Keep work area clean and well lit. 

Cluttered or dark 

areas invite accidents.

b ) 

Do not operate power tools in explosive 
atmospheres, such as in the presence of flammable 
liquids, gases or dust.

Power tools create sparks which 

may ignite the dust or fumes.

c ) 

Keep children and bystanders away while operating 
a power tool. 

Distractions can cause you to lose control.

2)  Electrical safety

a ) 

Power tool plugs must match the outlet. Never 
modify the plug in any way. Do not use any adapter 
plugs with earthed (grounded) power tools. 

Unmodified plugs and matching outlets will reduce risk of 
electric shock.

b ) 

Avoid body contact with earthed or grounded 
surfaces such as pipes, radiators, ranges and 
refrigerators. 

There is an increased risk of electric shock if 

your body is earthed or grounded.

c ) 

Do not expose power tools to rain or wet conditions. 

Water entering a power tool will increase the risk of 
electric shock.

d ) 

Do not abuse the cord. Never use the cord for 
carrying, pulling or unplugging the power tool. Keep 
cord away from heat, oil, sharp edges or moving 
parts. 

Damaged or entangled cords increase the risk of 

electric shock.

e ) 

When operating a power tool outdoors, use an 
extension cord suitable for outdoor use. 

Use of a cord 

suitable for outdoor use reduces the risk of electric shock.

f ) 

If operating a power tool in a damp location is 
unavoidable, use a residual current device (RCD) 
protected supply. 

Use of an RCD reduces the risk of 

electric shock.

3)  Personal safety

a ) 

Stay alert, watch what you are doing and use 
common sense when operating a power tool. Do not 
use a power tool while you are tired or under the 
influence of drugs, alcohol or medication. 

A moment 

of inattention while operating power tools may result in 
serious personal injury.

b ) 

Use personal protective equipment. Always wear 
eye protection. 

Protective equipment such as dust mask, 

non-skid safety shoes, hard hat, or hearing protection used 
for appropriate conditions will reduce personal injuries.

c ) 

Prevent unintentional starting. Ensure the switch 
is in the off position before connecting to power 
source and/or battery pack, picking up or carrying 
the tool. 

Carrying power tools with your finger on the 

switch or energising power tools that have the switch on 
invites accidents.

d ) 

Remove any adjusting key or wrench before turning 
the power tool on. 

A wrench or a key left attached 

to a rotating part of the power tool may result in 
personal injury.

e ) 

Do not overreach. Keep proper footing and balance 
at all times. 

This enables better control of the power tool 

in unexpected situations.

f ) 

Dress properly. Do not wear loose clothing or 
jewellery. Keep your hair, clothing and gloves away 
from moving parts. 

Loose clothes, jewellery or long hair 

can be caught in moving parts.

g ) 

If devices are provided for the connection of dust 
extraction and collection facilities, ensure these are 
connected and properly used.

 Use of dust collection 

can reduce dust-related hazards.

4)  Power tool use and care

a ) 

Do not force the power tool. Use the correct power 
tool for your application. 

The correct power tool 

will do the job better and safer at the rate for which it 
was designed.

b ) 

Do not use the power tool if the switch does not turn 
it on and off. 

Any power tool that cannot be controlled 

with the switch is dangerous and must be repaired.

c ) 

Disconnect the plug from the power source and/or 
the battery pack from the power tool before making 
any adjustments, changing accessories, or storing 
power tools.

 Such preventive safety measures reduce the 

risk of starting the power tool accidentally.

d ) 

Store idle power tools out of the reach of children 
and do not allow persons unfamiliar with the power 
tool or these instructions to operate the power tool. 

Power tools are dangerous in the hands of untrained users.

e ) 

Maintain power tools. Check for misalignment or 
binding of moving parts, breakage of parts and any 
other condition that may affect the power tool’s 
operation. If damaged, have the power tool repaired 
before use.

 Many accidents are caused by poorly 

maintained power tools.

f ) 

Keep cutting tools sharp and clean. 

Properly 

maintained cutting tools with sharp cutting edges are less 
likely to bind and are easier to control.

g ) 

Use the power tool, accessories and tool bits etc., 
in accordance with these instructions taking into 
account the working conditions and the work to be 
performed. 

Use of the power tool for operations different 

from those intended could result in a hazardous situation.

5)  Battery tool use and care

a ) 

Recharge only with the charger specified by the 
manufacturer.

A charger that is suitable for one type 

of battery pack may create a risk of fire when used with 
another battery pack.