DEWALT DCD996NT - Инструкция по эксплуатации - Страница 12

10

English

1   Kitbox
1   Charger
1   Side handle
1   Instruction manual

nOTE

: Battery packs, chargers and kitboxes are not included 

with N-models. Battery packs and chargers are not included 
with NT models. B models include Bluetooth® battery packs.

nOTE: 

The Bluetooth® word mark and logos are registered 

trademarks owned by the Bluetooth®, SIG, Inc. and any use of 
such marks by 

D

e

WALT

 is under license. Other trademarks and 

trade names are those of their respective owners.

•  Check for damage to the tool, parts or accessories which may 

have occurred during transport.

•  Take the time to thoroughly read and understand this manual 

prior to operation.

Markings on Tool

The following pictograms are shown on the tool:

Read instruction manual before use.

Date Code Position 

The date code, which also includes

the year of manufacture, is 

printed into the housing.
Example:

2016 XX XX

Year of Manufacture

Description (Fig. A, B)

WARNING: 

Never modify the power tool or any part of it. 

Damage or personal injury could result.

1 

Trigger switch

2 

Forward/reverse control button

3 

Worklight

4 

Chuck

5 

Torque adjustment collar

6 

Gear shifter

7 

Side handle

8 

Battery pack

9 

Battery release button

10 

Belt hook

11 

Mounting screw

12 

Magnetic bit holder

13 

Worklight switch

14 

Low worklight mode

15 

Medium worklight mode

16 

Spotlight mode

17 

Fuel gauge

18 

Main handle

Intended Use

These drills drivers/hammerdrills are designed for professional 
drilling, percussion drilling and screwdriving applications. This 

tool is compatible with Bluetooth® Battery Technology and with 
the 

D

e

WALT

 Tool Connect™ App. Please see your Tool Connect™ 

App instruction manual for more information.

DO nOT 

use under wet conditions or in the presence of 

flammable liquids or gases.
These drills/drivers/hammerdrills are professional power tools.

DO nOT

 let children come into contact with the tool. 

Supervision is required when inexperienced operators use 
this tool.
• 

Young children and the infirm.

 This appliance is not 

intended for use by young children or infirm persons 
without supervision. 

•  This product is not intended for use by persons (including 

children) suffering from diminished physical, sensory or 
mental abilities; lack of experience, knowledge or skills 
unless they are supervised by a person responsible for their 
safety. Children should never be left alone with this product.

ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal 
injury, turn tool off and disconnect battery pack 
before making any adjustments or removing/
installing attachments or accessories. 

An accidental 

start-up can cause injury.

WARNING: 

Use only 

D

e

WALT

 battery packs and chargers.

Inserting and Removing the Battery Pack 
from the Tool (Fig. B)

nOTE:

 Make sure your battery pack 

 8 

 is fully charged.

To Install the Battery Pack into the Tool 
Handle

1.  Align the battery pack 

 8 

 with the rails inside the tool’s 

handle (Fig. B).

2.  Slide it into the handle until the battery pack is firmly seated 

in the tool and ensure that you hear the lock snap into place.

To Remove the Battery Pack from the Tool

1.  Press the release button 

 9 

 and firmly pull the battery pack 

out of the tool handle.

2.  Insert battery pack into the charger as described in the 

charger section of this manual.

 Fuel Gauge Battery Packs (Fig. B)

Some 

D

e

WALT

 battery packs include a fuel gauge which 

consists of three green LED lights that indicate the level of 
charge remaining in the battery pack.
To actuate the fuel gauge, press and hold the fuel gauge button 

 17 

. A combination of the three green LED lights will illuminate 

designating the level of charge left. When the level of charge 
in the battery is below the usable limit, the fuel gauge will not 
illuminate and the battery will need to be recharged.

nOTE: 

The fuel gauge is only an indication of the charge left on 

the battery pack. It does not indicate tool functionality and is 
subject to variation based on product components, temperature 
and end-user application.