Шуруповерты DEWALT DCD996NT - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
4
English
Charger
DCB107
Mains voltage
V
AC
230
Battery type
10.8/14.4/18 Li-Ion
Approx. charging time of
battery packs
min
60 (1.3 Ah)
70 (1.5 Ah)
90 (2.0 Ah)
140 (3.0 Ah) 185 (4.0 Ah) 240 (5.0 Ah)
Weight
kg
0.29
Charger
DCB112
Mains voltage
V
AC
230
Battery type
10.8/14.4/18 Li-Ion
Approx. charging time of
battery packs
min
40 (1.3 Ah)
45 (1.5 Ah)
60 (2.0 Ah)
90 (3.0 Ah) 120 (4.0 Ah) 150 (5.0 Ah)
Weight
kg
0.36
Charger
DCB113
Mains voltage
V
AC
230
Battery type
10.8/14.4/18 Li-Ion
Approx. charging time of
battery packs
min
30 (1.3 Ah)
35 (1.5 Ah)
50 (2.0 Ah)
70 (3.0 Ah) 100 (4.0 Ah) 120 (5.0 Ah)
Weight
kg
0.4
Charger
DCB115
Mains voltage
V
AC
230
Battery type
10.8/14.4/18 Li-Ion
Approx. charging time of
battery packs
min
22 (1.3 Ah)
22 (1.5 Ah)
30 (2.0 Ah)
45 (3.0 Ah)
60 (4.0 Ah)
75 (5.0 Ah)
Weight
kg
0.5
Charger
DCB118
Mains voltage
V
AC
230
Battery type
18/54 Li-Ion
Approx. charging time of
battery packs
min
22 (1.3 Ah)
22 (1.5 Ah) 30 (2.0 Ah)
45 (3.0 Ah)
60 (4.0 Ah) 75 (5.0 Ah)
60 (6.0 Ah)
Weight
kg
0,66
The DCB107, DCB112, DCB113 and DCB115 chargers accept
10.8V, 14.4V, 18V Li-Ion XR and XR FLEXVOLT
TM
battery packs
(DCB123, DCB127, DCB141, DCB142, DCB143, DCB144, DCB145,
DCB181, DCB182, DCB183, DCB183B, DCB184, DCB184B,
DCB185 and DCB546) battery packs.
The DCB118 charger accepts 18V Li-Ion XR and XR FLEXVOLT
TM
battery packs (DCB181, DCB182, DCB183, DCB183B, DCB184,
DCB184B, DCB185 and DCB546).
Fuses:
Europe
230V tools
10 Amperes. mains
U.K. & Ireland
230V tools
3 Amperes. in plugs
EC-Declaration of Conformity
Machinery Directive
Drill/Driver/Hammerdrill
DCD991, DCD996
D
e
WALT
declares that these products described under
Technical Data
are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-1:2010,
EN60745-2-2:2010.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
D
e
WALT
at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
D
e
WALT
.
Markus Rompel
Director Engineering
D
e
WALT
, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
29.02.2016
WARNING:
To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER:
Indicates an imminently hazardous
situation which, if not avoided,
will
result in
death or
serious injury
.
WARNING:
Indicates a potentially hazardous situation
which, if not avoided,
could
result in
death or
serious injury
.
CAUTION:
Indicates a potentially hazardous situation
which, if not avoided,
may
result in
minor or
moderate injury
.
NOTICE:
Indicates a practice
not related to
personal injury
which, if not avoided,
may
result in
property damage
.
Denotes risk of electric shock.
Denotes risk of fire.
General Power Tool Safety Warnings
WARNING: Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
