Bosch GDB 2500 WE - Инструкция по эксплуатации - Страница 13

 English | 

13

Bosch Power Tools

1 609 929 W83 | (9.11.10)

4) Power tool use and care

a) Do not force the power tool. Use the cor-

rect power tool for your application. 

The 

correct power tool will do the job better 
and safer at the rate for which it was de-
signed.

b) Do not use the power tool if the switch 

does not turn it on and off. 

Any power tool 

that cannot be controlled with the switch 
is dangerous and must be repaired.

c) Disconnect the plug from the power 

source and/or the battery pack from the 
power tool before making any adjust-
ments, changing accessories, or storing 
power tools. 

Such preventive safety 

measures reduce the risk of starting the 
power tool accidentally.

d) Store idle power tools out of the reach of 

children and do not allow persons unfa-
miliar with the power tool or these in-
structions to operate the power tool. 

Power tools are dangerous in the hands of 
untrained users.

e) Maintain power tools. Check for misalign-

ment or binding of moving parts, break-
age of parts and any other condition that 
may affect the power tool’s operation. If 
damaged, have the power tool repaired 
before use. 

Many accidents are caused by 

poorly maintained power tools.

f) Keep cutting tools sharp and clean. 

Prop-

erly maintained cutting tools with sharp 
cutting edges are less likely to bind and 
are easier to control.

g) Use the power tool, accessories and tool 

bits etc. in accordance with these instruc-
tions, taking into account the working 
conditions and the work to be performed. 

Use of the power tool for operations differ-
ent from those intended could result in a 
hazardous situation.

5) Service

a) Have your power tool serviced by a qual-

ified repair person using only identical 
replacement parts. 

This will ensure that 

the safety of the power tool is maintained.

Safety Warnings for Diamond Drills

f

Hold the power tool only by the insulated 
gripping surfaces of the drill stand when 
performing operations where the applica-
tion tool could contact hidden wiring or its 
own power cord. 

Contact with a “live” wire 

will also make exposed metal parts of the 
power tool “live” and shock the operator.

f

Use suitable detectors to determine if utili-
ty lines are hidden in the work area or call 
the local utility company for assistance. 

Contact with electric lines can lead to fire 
and electric shock. Damaging a gas line can 
lead to explosion. Penetrating a water line 
causes property damage or may cause an 
electric shock.

Never operate the machine with-
out the residual current device 
(RCD) provided.

f

Before starting work, check the proper func-
tion of the residual current device (RCD). 
Have a damaged residual current device 
(RCD) repaired or replaced by your Bosch 
after-sales service agent.

f

Pay attention that neither persons in the 
working area nor the power tool itself come 
into contact with the water that comes out.

f

Pay attention that water-conducting hoses, 
connnection elements and the water collec-
tion ring (accessory) are in proper condi-
tion. Replace damaged or worn parts before 
using the next time. 

Water coming out of 

power tool components increases the risk of 
electric shock.

f

Store the machine in a safe manner when 
not being used. The storage location must 
be dry and lockable. 

This prevents the ma-

chine from storage damage, and from being 
operated by untrained persons.

f

Keep handles dry, clean, and free from oil 
and grease. 

Greasy, oily handles are slippery 

causing loss of control.

OBJ_BUCH-114-002.book  Page 13  Tuesday, November 9, 2010  11:58 AM