Black+DECKER KR 604 CRES - Инструкция по эксплуатации - Страница 9

8

ENGLISH

Selecting the drilling mode



For drilling in masonry, set the drilling mode 
selector (4) to the   position.



For drilling in other materials and for screwdriv-
ing, set the drilling mode selector to the   posi-
tion.

Setting the drilling depth (

fi

 g. G)



Slacken the side handle (7) by turning the grip 
counter clockwise.



Set the depth stop (6) to the desired position. The 
maximum drilling depth is equal to the distance 
between the tip of the drill bit and the front end 
of the depth stop.



Tighten the side handle by turning the grip 
clockwise.

Switching on and off



To switch the tool on, press the variable speed 
switch (1). The tool speed depends on how far 
you press the switch. As a general rule, use 
low speeds for large diameter drill bits and high 
speeds for smaller diameter drill bits.



For continuous operation, press the lock-on but-
ton (2) and release the variable speed switch. 
This option is available only at full speed in both 
forward and reverse modes.



To switch the tool off, release the variable speed 
switch. To switch the tool off when in continuous 
operation, press the variable speed switch again 
and release it.

Accessories

The performance of your tool depends on the ac-
cessory used. Black & Decker and Piranha acces-
sories are engineered to high quality standards and 
designed to enhance the performance of your tool. 
By using these accessories you will get the very 
best from your tool.

Maintenance

Your Black & Decker tool has been designed to 
operate over a long period of time with a minimum 
of maintenance. Continuous satisfactory operation 
depends upon proper tool care and regular clean-
ing.

Warning! 

Before per forming any maintenance, 

switch off and unplug the tool.



Regularly clean the ventilation slots in your tool 
using a soft brush or dry cloth.



Regularly clean the motor housing using a  damp 
cloth. Do not use any abrasive or solvent-based 
cleaner.



Regularly open the chuck and tap it to remove 
any dust from the interior (when 

fi

 tted).

Mains plug replacement (U.K. & Ireland only)

If a new mains plug needs to be 

fi

 tted:



Safely dispose of the old plug.



Connect the brown lead to the live terminal in 
the new plug.



Connect the blue lead to the neutral terminal.

Warning! 

No connection is to be made to the earth 

terminal. Follow the 

fi

  tting instructions supplied with 

good quality plugs. Recommended fuse: 5 A.

Protecting the environment

Separate c ollection. This product must 
not  be  disposed  of  with  normal  household 
waste.

Should you 

fi

 nd one day that your Black & Decker 

product needs replacement, or if it is of no further 
use to you, do not dispose of it with household 
waste.  Make  this  product  available  for  separate 
collection.

Separate  collection  of  used  products  and 
packaging allows mater ials to be recy-
cled and used again. Re-use of recycled 
mater ials helps prevent environment al 
pollution and reduces the demand for raw 
materials.

Local regulations may provide for separate collec-
tion  of  electrical  products  from  the  household,  at 
municipal waste sites or by the retailer when you 
purchase a new product.

Black & Decker provides a facility for the collection 
and recycling of Black  &  Decker products once they 
have reached the end of their working life. To take 
advantage of this service please return your product 
to any authorised repair agent who will collect them 
on our behalf.

You can check the location of your nearest au-
thor ised  repair  agent  by  c ontacting  your  loc al 
Black & Decker of f ice at the address indicated 
in  this  manual.  Alternatively,  a list  of  authorised 
Black & Decker repair agents and full details of our 
after-sales service and contacts are available on 
the Internet at: 

www.2helpU.com

.