Bosch 18V-10, (06019J4004) - Инструкция по эксплуатации - Страница 9

English | 

9

Additional Safety Information

Wear safety goggles.

u

Use suitable detectors to determine if there are hid-
den supply lines or contact the local utility company
for assistance.

 Contact with electric cables can cause

fire and electric shock. Damaging gas lines can lead to ex-
plosion. Breaking water pipes causes property damage.

u

Do not touch grinding and cutting discs until they have
cooled down.

 The discs can become very hot while work-

ing.

u

Release the On/Off switch and set it to the Off posi-
tion when the power supply is interrupted, e.g. when
the battery pack is removed.

 This prevents uncontrolled

restarting.

u

Secure the workpiece.

 A workpiece clamped with

clamping devices or in a vice is held more secure than by
hand.

u

Do not open the battery. 

There is a risk of short-circuit-

ing.

Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture.

 There is a risk of explosion and

short-circuiting.

u

In case of damage and improper use of the battery, va-
pours may be emitted. The battery can set alight or ex-
plode. 

Ensure the area is well ventilated and seek medical

attention should you experience any adverse effects. The
vapours may irritate the respiratory system.

u

Only use the battery with products from the manufac-
turer.

 This is the only way in which you can protect the

battery against dangerous overload.

u

The battery can be damaged by pointed objects such
as nails or screwdrivers or by force applied externally.

An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.

Product Description and
Specifications

Read all the safety and general instructions.

Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.

Please observe the illustrations at the beginning of this oper-
ating manual.

Intended use

The power tool is intended for cutting, roughing and brush-
ing metal and stone materials, as well as making holes in
stone materials using diamond core cutters, without the use
of water.
A special protective guard for cutting must be used when
cutting bonded abrasives.
Sufficient dust extraction must be provided when cutting
stone.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
The power tool must not be used to grind concrete.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.

(1)

Unlocking lever for protective guard

(2)

Direction of rotation arrow on housing

(3)

Spindle lock button

(4)

On/off switch

(5)

Battery

A)

(6)

Battery release button

A)

(7)

Auxiliary handle (insulated gripping surface)

(8)

Protective guard for grinding

(9)

Mounting flange with O‑ring (M14)

(10)

Grinding disc

(11)

Quick-clamping nut with bar (M14)

(12)

Clamping nut (M10)

(13)

Protective guard for cutting

A)

(14)

Cutting disc

A)

(15)

Handle (insulated gripping surface)

(16)

Grinding spindle

(17)

Hand guard

A)

(18)

Rubber sanding pad

A)

(19)

Abrasive disc

A)

(20)

Round nut

A)

(21)

Cup brush

A)

(22)

Diamond core bit

A)

(23)

Button for battery charge indicator

A)

(24)

Battery charge indicator

A)

(25)

Extraction guard for cutting with a guide block

A)

(26)

Diamond cutting disc

A)

A)

Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Technical Data

Angle grinder

GWS 18V-10

GWS 18V-10

GWS 18V-10

Article number

3 601 JJ4 0..

3 601 JJ4 0..

3 601 JJ4 0..

Bosch Power Tools

1 609 92A 51Z | (13.09.2019)