D-Link DIR-860L 802.11ac - Инструкция по эксплуатации - Страница 33

29

D-Link DIR-860L User Manual

Section 3 - Configuration

Select 

PPTP.(Username/Password)

 from the drop-down menu.

Select 

Static

  if  your  ISP  assigned  you  an  IP  address,  subnet  mask, 

gateway, and DNS server addresses. In most cases, select 

Dynamic

.

Enter the IP address (Static PPTP only).

Enter  the  Primary  and  Secondary  DNS  Server  Addresses  (Static  PPTP 

only).

Enter the Gateway IP Address provided by your ISP.

Enter the Server IP provided by your ISP (optional).

Enter your PPTP username.

Enter your PPTP password and then retype the password in the next box.

Enter  a  maximum  idle  time  during  which  the  Internet  connection 

is  maintained  during  inactivity.  To  disable  this  feature,  enable  Auto-

reconnect.

The DNS server information will be supplied by your ISP.

Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is the default 

MTU.

The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended 

that you change the default MAC address unless required by your ISP.  You can use the 

Clone.Your.PC’s.MAC.Address

 button to 

replace the Internet port’s MAC address with the MAC address of your Ethernet card.

PPTP

Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username and password. This 

option is typically used for DSL services. 

My Internet 

Connection:

Address Mode:

PPTP IP Address:

PPTP Subnet Mask:

PPTP Gateway:

PPTP Server IP:

Username:

Password:

Maximum Idle 

Time:

DNS Servers:

MTU:

MAC Address: