D-Link DIR-860L 802.11ac - Инструкция по эксплуатации - Страница 30

26

D-Link DIR-860L User Manual

Section 3 - Configuration

Select 

Static.IP

 to manually enter the IP settings supplied by your ISP.

Enter the IP address assigned by your ISP.

Enter the Subnet Mask assigned by your ISP.

Enter the Gateway assigned by your ISP.

The DNS server information will be supplied by your ISP

Maximum  Transmission  Unit  -  you  may  need  to  change  the  MTU  for 

optimal performance with your specific ISP. 1500 is the default MTU.

The default MAC Address is set to the Internet port’s physical interface 

MAC address on the Broadband Router. It is not recommended that you 

change the default MAC address unless required by your ISP.  You can 

use the 

Clone.Your.PC’s.MAC.Address

 button to replace the Internet 

port’s MAC address with the MAC address of your Ethernet card.

My Internet 

Connection Is:

IP Address:

Subnet Mask:

Default Gateway:

DNS Servers:

MTU:

MAC Address:

Manual Internet Setup

Static IP

Select your connection type from the 

My.Internet.Connect.Is

 drop-down box. Choose Static IP if all of the necessary IP information has been provided 

by your ISP. You will need to enter the IP address, subnet mask, gateway address, and DNS address(es). Each IP address entered in the fields must 

be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.