DREAME Bot Robot Vacuum and Mop D9 Pro Black (RLS5-BL0) - Инструкция по эксплуатации - Страница 8

10

11

EN

EN

This product works with the Mi Home/Xiaomi Home app. * Use the Mi Home/Xiaomi Home app to control your device and to interact with other 

smart home devices.

Connecting with Mi Home/Xiaomi Home App

1. Download the Mi Home/Xiaomi Home App

2. Add Device

Scan the QR code to download and install the app. You will be 

directed to the connection setup page if the app has been installed 

already. Alternatively, search “Mi Home/Xiaomi Home” in the app 

store to download and install it.

Open the Mi Home/Xiaomi Home app, and tap "   " in the upper right. 

Then tap "   " in the top right corner, scan the QR code, add "Dreame 

Bot D9 Pro", and follow the prompts to finish the connection.

3. Reset Wi-Fi

Note:

 If your robot cannot connect to the app successfully, reset the Wi-Fi and 

add the device again.

Simultaneously press and hold the buttons   and   until you hear a 

voice say, “Waiting for the network configuration.” Once the Wi-Fi 

indicator is blinking slowly, the Wi-Fi has been successfully reset.

Wi-Fi Indicator

· Blinking slowly: To be connected

· Blinking quickly: Connecting

· On: Wi-Fi connected

· Only 2.4GHz Wi-Fi is supported.

· The version of the app might have been updated, please follow the 

instructions based on the current app version.

Note:

1. Turn On/Off

3. Cleaning Mode

How to Use

Dreame Bot L10 S has four cleaning modes: Quiet, Standard, Strong 

and Turbo. The default mode is Standard. You can specify the 

cleaning mode in the Mi Home/Xiaomi Home app.

2. Start Cleaning

Press the button   briefly to turn on the robot. Upon activation, the 

robot will accurately map out a route, methodically clean each room 

along the edges and walls, then finish by cleaning in an S-shaped 

pattern to ensure a thorough job.

Press and hold the button   for 3 seconds to turn on the robot. Once 

the power indicator turns solid white, the robot is in standby mode. 

To turn off the robot, press and hold the button   for 3 seconds when 

the robot is not moving. Turning off the robot will end the current 

cleaning task.

· Before a cleaning task, make sure the robot is fully charged and starts 

from the charging dock. Do not move the charging dock while the robot is 

cleaning.

· If the battery is too low, the robot will automatically return to the dock 

to charge. It will resume unfinished cleaning tasks after charging to the 

necessary battery level. (The breakpoint continuous cleaning function must 

be enabled on the app in advance.)

Note:

4. Pause/Sleep Mode

Pause: Press any button to pause the robot during cleaning.

Sleep Mode: The robot will automatically enter Sleep Mode after 10 

minutes of inactivity, then the power and charging indicators will go 

off. To wake up the robot, press any button.

· The robot will turn off automatically if left in Sleep Mode for more than 12 hours.

· When the robot is paused, placing it onto the charging dock will end the 

current cleaning task.

Note:

5. Do Not Disturb Mode

Do Not Disturb Mode prevents the robot from automatically starting 

cleaning tasks, and the power indicator remains off. You can enable 

Do Not Disturb Mode or modify its hours in the app. (The mode is on 

by default from 22:00 to 08:00.)

· Scheduled cleaning tasks will still be carried out during the DND period.

· The robot will continue cleaning after the DND period ends.

Note: