Yamaha CDX-397MK2 - Инструкция по эксплуатации - Страница 13

En
g

lis

h

11

 En

Normal illumination

Slightly dim

Dim

Notes

●

When the automatic spacing function is in effect, the display of
the total time and of the total remaining time includes each
interval of the 4 seconds between tracks.

●

When the automatic spacing function is in effect during the
playback, “AUTO SPC 4” (the remaining seconds of the
interval) appears and is counted down each time blinking at the
interval between the tracks.

You can change brightness of the display
in three degrees by pressing 

DIMMER

.

If you record a disc onto tape with an insufficient time space between tracks, the tape deck will not be able to perform blank
search operations on the tape correctly. To enable a track search operation, use this function to add an interval of about 4
seconds between tracks.

Changing brightness of the display

DIMMER

SPACE

Automatic spacing

Press 

SPACE

 to light up the current setting.

Light up about 3 seconds.

While the current setting is lit up, press 

SPACE

 to

change the setting between “AUTO SPACE ON” and
“AUTO SPACE OFF”.

Adjusting the output level

You can adjust the level of signals output to the amplifier by
pressing

 OUTPUT LEVEL +/–

.

OUTPUT

LEVEL

Note

While playing back an MP3/WMA disc, the level of the audio
signal sent to the DIGITAL OUT (OPTICAL) terminal is fixed at
maximum regardless of the displayed volume level.