Bertazzoni MAS100 6 MFE D XT - Инструкция по эксплуатации - Страница 3

3 

Installer information         The installation, all adjustments, transformations and maintenance listed in this    
                                         part of the manual must

be carried out only by skilled personnel. 

     Improper installation may cause damage to persons, animals or property, for 
     which the manufacture will not be held responsible. 
     The appliance safety or automatic adjustment devices may be changed during 
     the service life of the system only by the manufacturer or by the duly authorised 
     supplier. 

Installing the cooker         After having removed the various loose parts from the internal and external      
                                         packing, make sure that the cooker is not damaged. In case of doubt, do not use          
                                         the appliance and contact skilled personnel. 

          Keep all the dangerous packing parts (polystyrene foam, bags, cardboard,      
          staples, etc.) away from children. 

  The appliance can be installed as a freestanding unit, next to a wall at a distance of      
  less than 20mm (Fig.1B, Class 1Installation) or inserted between two walls (see    
  Fig.1A, Class 2 Subclass 1 Installation). A single sidewall that exceeds the height    
  of the work surface is possible. This must be at a minimum distance of 70 mm from     
  the edge of the cooker (see Fig.1B, Class 1 Installation). 

 Any walls of the adjacent furniture pieces and the wall behind the cooker must be      
 made with heat-resistant material that can withstand a minimum over temperature  
 of 65 K. 

 WARNING: the connection to the gas network must only use metal flexible  
 pipes that conform with the national standards in force. 

Fig.1A 

                                                                     Fig.1B