VERTO 52G206 - Инструкция по эксплуатации - Страница 11

11

GWARANCJA I SERWIS

Warunki gwarancji oraz opis postepowania w prz ypadku reklamacji 
zawar te są w załączonej Karcie Gwarancyjnej.

Ser wis Centralny
GT X Ser vice 

tel. +48 22 573 03 85

Ul. Pograniczna 2/4 

fax. +48 22 573 03 83 

02-285 Warszawa 

e -mail  ser vice@gtxser vice.pl

Sieć Punktów Ser wisowych do napraw gwarancyjnych 
i pogwarancyjnych dostępna na platformie internetowej 

gtxservice.pl

Grupa Topex zapewnia dostępność części zamiennych oraz 
materiałów eksploatacyjnych dla urządzeń i elektronarzędzi.

Pełna ofer ta części i usług na 

gtxservice.pl

. Zeskanuj kod QR i wejdź:

TRANSLATION OF THE ORIGINAL INSTRUCTIONS

M I T R E  S AW    

52G206

CAUTION: BEFORE USING THE TOOL READ THIS MANUAL CAREFULLY 
AND KEEP IT FOR FUTURE REFERENCE.

DETAILED SAFET Y REGULATIONS

P R E C AU T I O N S:

•

Do not use damaged or deformed cutting blades.

•

Replace table inser t when it is worn out.

•

Use only cutting blades that are recommended by the 
manufacturer and comply with the standard EN 847-1.

•

Do not use cutting blades made of high speed steel.

•

Use personal protection measures, such as:

–

earmuff protectors to reduce risk of hearing damage,

–

eye shield,

–

respirator y system protection to reduce risk of harmful dusts 
inhalation,

–

gloves for cutting blades maintenance (hold cutting blades by 
holder whenever possible) and other rough materials.

•

Connect dust extraction system when cutting wood.

S A F E  O P E R AT I O N:

•

Match cutting blade with material that you plan to cut.

•

Never use mitre saw for cutting materials other than specified by 
the manufacturer.

•

Do not use the saw without guard or when the guard is blocked.

•

Ensure that saw arm is well fixed when making a mitre cut.

•

Floor close to the machine should be kept tidy and without loose 
materials like scobs and other wastes.

•

Provide appropriate top or spot lighting.

•

Machine operator should be trained for use, operation and 
working with the machine.

•

Use only sharp cutting blades. Obser ve maximum speed marked 
on the cutting blade.

•

Ensure that spacing washers and spindle rings are used 
accordingly to the manufacturer instructions.

•

If the mitre saw is equipped with laser, replacement with laser of 
another type is forbidden. Repairs should be carried out by the 
manufacturer or authorized representative.

•

Before star ting to work always ensure the machine is fixed to a 
bench.

CAUTION! This device is designed to operate indoors.

The design is assumed to be safe, protection measures and 
additional safety systems are used, never theless there is always 
a small risk of operational injuries.

S A F E T Y  R U L E S  F O R  L A S E R  D E V I C E

Laser device used in the power tool design is the class 2 with maximum 
power below 1mW and wavelength 650 nm. Such device is not 
dangerous to your eyes, however do not look directly at the source of 
the light (temporary blindness hazard).

WARNING. 

Do not look directly at the source of laser beam. It may 

cause hazards. Follow the below safety rules.

•

Use the laser device in accordance to the manufacturer ’s 
instructions.

•

Do not, either intentionally or unintentionally, point the laser 
beam at people, animals or any object other than processed 
material.

•

Do not bring to accidental pointing the laser beam at bystanders’ 
or animals’ eyes for a period longer than 0.25 second, for instance 
by pointing the laser beam at mirrors.

GB