Seagate (ST16000NM002G) - Инструкция по эксплуатации - Страница 42

Seagate Exos X16 SAS Product Manual, Rev. K

41 

www.seagate.com

Installation

10.2

Cooling 

Cabinet cooling must be designed by the customer so that the ambient temperature immediately surrounding the drive will not exceed

temperature conditions specified in 

Section 6.6.1, "Temperature."

The rack, cabinet, or drawer environment for the drive must provide heat removal from the electronics and head and disk assembly (HDA). Users 
should confirm that adequate heat removal is provided using the temperature measurement guidelines described in 

Section 6.6.1

.

Forced air flow may be required to keep temperatures at or below the temperatures specified in Section 

Table 6.6.1

 in which case the drive

should be oriented, or air flow directed, so that the least amount of air flow resistance is created while providing air flow to the electronics and

HDA. Also, the shortest possible path between the air inlet and exit should be chosen to minimize the travel length of air heated by the drive and

other heat sources within the rack, cabinet, or drawer environment.

If forced air is determined to be necessary, possible air-flow patterns are shown in 

Figure 6

. The air-flow patterns are created by one or more fans, 

either forcing or drawing air as shown in the illustrations. Conduction, convection, or other forced air-flow patterns are acceptable as long as the

temperature measurement guidelines of 

Section 6.6.1

 are met.    

Figure 6. 

Air flow

Note

 Image is for reference only, may not represent actual drive.

Above unit

Under unit

Note.

  Air flows in the direction shown (back to front)

          or in reverse direction (front to back)

Above unit

Under unit

Note.

  Air flows in the direction shown or

           in reverse direction (side to side)