TEFAL CY621D34 - Инструкция по эксплуатации - Страница 86

86

CLEANING AND MAINTENANCE

• It is recommended to clean your appliance after each use. Before 

cleaning let your appliance cool down for at least 2 hours 

-26.

• Do not immerse the appliance in water or pour water into it, do not put 

the appliance, cooking pot or lid into the dishwasher 

-27-28

.

• You can wash the accessories in the dishwasher.

 - 29

.

• Remove the pot from the appliance, rince it and dry it off thoroughly. 

Do not use a scourer as this can damage the non stick coating in the 
pot 

- 30.

• Remove the condensation collector, clean it thoroughly under water and 

dry. 

- 31

.

• Remove the pressure limit valve to clean it, rinse it under water, and dry 

-32.

• To clean the lid, you need to detach it from the appliance, and clean all 

its components. First unscrew the middle lid screw, then pull on the peak 
in the middle to help you remove it 

- 33

.

– Separate the sealing gasket from the lid. To do this take a hold of the 

knob and pull the sealing gasket upwards 

-34.

– The float valve should be dismantle by removing the small silicone 

gasket, then turn the lid to get the float valve 

- 35

.

– The duct cover can be unscrewed to be cleaned, and the duct should 

be checked regularly to prevent blockage 

-36

. 

– Press on the internal part of the safety spring valve to check that it is 

not clogged 

- 37

.

– Then you can rinse the inside lid with clear water, check that all 

components you just cleaned are dried and place them all in their 
original position. 

• Clean the housing with a damp cloth, and place the inner pot back 

inside 

-38

. Then you can put back the lid into place before to store 

-39

.

• Always use the cooking pot provided. 
• Do not pour water or food directly into the appliance. If you inadvertently 

immerse your appliance in water or spill water directly on the heating 
element (when the pot is not in place), take it to your service centre for 
repair. 

• Change the sealing gasket every 2 years.