Bosch MUC22B42RU - Инструкция по эксплуатации - Страница 12

12

en 

Operation 

Note: 

When the programme 

[ паста ]

 (pasta) 

or 

[ фритюр ]

 ( deep frying) is selected, a 

repeating audible signal is emitted and the 

display and button 

G

 flash until the food 

has been added and button 

G

 has been 

pressed. 

The preparation time counts down.  

Steam that is formed when preparing the 

meals exits the multi-cooker via the steam 

outlet, thereby preventing the formation of 

excess pressure. Depending on the model, 

the steam outlet is fitted with a viewing 

window.

Increasing or reducing the 

temperature during preparation

If the current temperature was set too high 

or too low during the preparation, this can 

be increased (by +10°C max.) or decreased 

(by -10°C max.) accordingly during the 

cooking process. 

To increase the temperature, press and 

hold the 

C

 button. The current temperature 

will be briefly shown on the display and will 

then increase in 1°C increments until the 

maximum value is reached (+10°C). Press 

and hold the button until the temperature is 

at the increased level desired. 

To reduce the temperature, press and 

hold button 

C

. The current temperature will 

be briefly shown on the display and will 

initially increase in 1°C increments until the 

maximum value is reached (+10°C). Once 

the maximum value has been reached, the 

display will jump back to the minimum value 

(20°C lower). Press and hold the button 

until the temperature is at the reduced level 

desired. 

To continue with the preparation 

programme, press button 

G

.

Note:

 If button 

G

 is not pressed, the 

preparation programme will continue with 

the temperature that was previously set. 

When the preparation programme ends, 

an audible signal sounds and the indicator 

[ 

готово ] (finished) and button 

G

 light up. 

The display flashes and shows “00:00”.

5. 

Open the lid of the appliance and serve 

the meal that has been prepared. 

W

Risk of scalding!

■

During preparation, large amounts of 

steam may accumulate in the appliance. 

Open the lid with care. Do not lean over 

the lid of the appliance.

■

The pan and any inserts that are used 

may be very hot. Always use pan tongs, 

suitable handles or oven gloves.

Notes: 

■

The preparation programme can be 

stopped at any time using button 

H

. 

The appliance subsequently switches to 

function selection mode.

■

If the preparation programme features 

the keep warm function, this is switched 

on automatically once the meal is ready 

and keeps the meal warm for up to 

10 hours at 40°C. [ готово ] (finished) 

and 

[ подогрев ]

 (keep warm) light up. 

A rectangle lights up in the display 

(dotted lines). The keep warm function 

can be ended using button 

H

. The 

appliance subsequently switches to 

function selection mode. 

If the selected preparation programme 

consists of multiple preparation steps, an 

audible signal sounds once the next step 

needs to take place. In the control panel, 

LEDs 1, 2, 3 or 4 are shown accordingly 

and button 

G

 flashes. Perform the 

following steps:

■

Open the lid of the appliance.

■

Add additional ingredients.

■

Close the lid of the appliance. 

■

Start the next preparation step using 

button 

G

.