Bosch MUC22B42RU - Инструкция по эксплуатации - Страница 11

 11

 en

 Operation

Operation

Function selection mode

In function selection mode, all preparation 

programmes are selected and all settings 

are made on the appliance. To do this, 

perform the following steps:

W

Risk of scalding!

During operation, the appliance must never 

be used without the pan and the steam 

outlet inserted. 

Caution!

Each time prior to operation, check the 

appliance for damage, completeness, 

cleanliness and proper installation. 

X

 “Before using for the first time” see 

page 9

1. 

The appliance is ready to use. Press 

button 

B

 in order to access function 

selection mode.

In function selection mode, button 

B

 and 

the indicator 

[ мой режим ]

 (my mode) are 

permanently lit. Button 

G

 flashes. “00:00” 

is shown in the display. 

Note:

 If no input is made on the control 

panel within 5 minutes, the appliance 

automatically switches to standby mode.

Selecting and starting a 

preparation programme

There are 16 pre-configured preparation 

programmes available to choose from. 

X

 “List of preparation programmes” see 

page 19

1. 

Fill the appliance with the desired 

ingredients. To do this, open the lid and 

pour the ingredients into the pan. The 

measuring scale on the inside of the pan 

can also be used to read the quantity.

Caution!

■ Do not fill the pan beyond the mark 

[4.0 litres]!

■

Use only the spatula provided for stirring 

(do not use metal cutlery).

2. 

Close the lid and press button 

B

 to 

access function selection mode.

Note: 

Certain preparation programmes 

or steps are carried out with the lid open. 

X

See recipe book provided

3. 

Keep pressing button 

D

 until the 

desired preparation programme is 

selected.  

The corresponding LED lights up in the 

control panel and the pre-configured 

preparation time for the selected 

preparation programme flashes.

4. 

Press button 

G

 to start the preparation 

programme.  

The appliance heats up the pan until the 

target temperature is reached. During 

the heating phase, lines that light up in a 

clockwise direction appear in the display. 

Once the target temperature is reached, 

the lines go out and the preparation time is 

shown in the display. 

The preparation process starts 

automatically.