Bosch MUC22B42RU - Инструкция по эксплуатации - Страница 13

 13

 en

 Operation

The appliance heats up the appliance 

interior until the target temperature of the 

next preparation step is reached. During 

the heating phase, lines that light up in a 

clockwise direction appear in the display. 

Once the target temperature is reached, the 

lines go out and the next preparation time 

is shown in the display. The preparation 

process starts automatically. The 

preparation time counts down.

Selecting a pre-configured 

preparation time

The pre-configured preparation time of 

the level 

[ средняя ]

 (medium) is shown 

on the control panel for each preparation 

programme.

The preparation time can be shortened 

[ короткая ] 

or lengthened 

[ длинная ]

. 

1. 

Keep pressing button 

E

 until the 

desired indicator is lit. The display 

changes from 

[ средняя ]

 (medium) 

to 

[ длинная ]

 (longer) and then to 

[ короткая ]

 (shorter) before returning to 

[ средняя ]

 (medium).

The corresponding pre-configured values 

for the preparation time are shown in the 

display.

2. 

Press button 

G

 to start the preparation 

programme. 

Extending the preparation time 

during preparation

If the ingredients are not yet fully cooked 

shortly before the end of a preparation 

programme, the preparation time can be 

extended.

1. 

To do this, press and hold button 

F

. 

The current preparation time will be briefly 

shown on the display and will then increase 

in 1-minute increments. 

2. 

Press and hold the button until the 

desired preparation time has been 

reached.

3. 

Activate the newly set preparation time 

using button 

G

. 

Setting a start time delay

The start time delay can be set for the 

selected preparation programme so you 

can enjoy a freshly prepared meal at a 

specific time. 

Note:

 the start time delay can only be 

set for certain preparation programmes. 

The pre-configured start time delay varies 

among these preparation programmes.

1. 

Select the preparation programme.

2. 

Press button 

A

. Button 

G

 flashes. 

“00:10” flashes in the display. 

Press button 

A

 repeatedly to increase the 

displayed time. A brief press increases the 

time by 5 minutes. A slightly longer press 

increases the time by 10 minutes. Pressing 

and holding button 

A

 for around 2 seconds 

increases the time by 30 minutes.

3. 

Press button 

G

 when the desired start 

time delay is displayed.

The desired start time delay is shown in 

the display. 

[ таймер ]

 (timer) lights up in 

the display. The time until the start counts 

down. Once this time has elapsed, the 

preparation process starts automatically. 

Notes: 

■

The start time delay can be switched 

off at any time by pressing button 

G

. 

The preparation programme then starts 

immediately.

■ If “00:10” does not flash in the display, 

a start time delay cannot be set for the 

selected preparation programme. 

Prematurely terminating the 

current preparation step 

If the ingredients are cooked ahead of time 

during one of the preparation steps, the 

step can also be terminated manually. 

1. 

To do this, press button 

G

 for at least 

2 seconds. 

This will terminate the current preparation 

step. An audible signal will then sound as 

usual once the next step can be carried out. 

In the control panel, LEDs 1, 2, 3 or 4 are 

shown accordingly and button 

G

 flashes.

2. 

Perform the next preparation step.