Материнские платы GIGABYTE GA 8N775 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Appendix
- 77 -
English
(6) Configuring a bootable RAID array with Microsoft Windows 2000
Problem:
Users cannot install Windows 2000 with Service Pack 2 (or previous versions) to a bootable
RAID volume.
There are two solutions to resolve this issue.
Solutions 1:
Use the NVRAID tool (nForce Driver Version 5.xx) to convert the boot volume to a RAID array. Here
are the detailed step-by-step instructions:
Step 1:
Install Windows 2000 onto a selected hard drive. Download and install Windows 2000 Service Pack 4
from Microsoft's website.
Step 2:
After system restarts, press Del to enter system BIOS Setup during POST (Power-On Self Test). Under
the
Integrated Peripherals
menu (Figure 21) assure the SATA port connecting the SATA hard disk (the
one containing the Windows 2000) is
Enabled
(Figure 21/22). Save settings and exit the BIOS setup.
Figure 21
Figure22
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Integrated Peripherals
IDE/SATAII RAID Config
[Press Enter]
On-Chip IDE Channel0
[Enabled]
On-Chip IDE Channel1
[Enabled]
IDE1 Conductor Cable
[Auto]
IDE2 Conductor Cable
[Auto]
Serial-ATAII 1
[Enabled]
Serial-ATAII 2
[Enabled]
On-Chip USB
[V1.1+V2.0]
USB Keyboard Support
[Disabled]
USB Mouse Support
[Disabled]
AC97 Audio
[Auto]
Onboard LAN Function
[Auto]
Onboard LAN Boot ROM
[Disabled]
Onboard Serial Port 1
[3F8/IRQ4]
i-Lock
[Enabled]
Onboard Parallel Port
[378/IRQ7]
Parallel Port Mode
[SPP]
Legacy USB storage detect
[Enabled]
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
IDE/SATAII RAID Config
Item Help
Menu Level
IDE/SATAII RAID function
[Enabled]
IDE Primary Master RAID
[Disabled]
IDE Primary Slave RAID
[Disabled]
IDE Secndry Master RAID
[Disabled]
IDE Secndry Slave RAID
[Disabled]
SATAII 1 Primary RAID
[Enabled]
SATAII 1 Secondary RAID
[Enabled]
SATAII 2 Primary RAID
[Enabled]
SATAII 2 Secondary RAID
[Enabled]
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F3: Language F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
