GIGABYTE GA 8N775 - Инструкция по эксплуатации - Страница 75

Appendix

- 75 -

English

Step 3:
If Setup correctly recognizes the driver in the floppy disk, a controller menu similar to Figure 17 below
will appear. Use the ARROW keys to select 

NVIDIA RAID CLASS DRIVER

(Note)

(Figure 17) and press

ENTER. Later, when a screen similar to Figure 18 appears, you must press S to select additional
driver.  The screen will return to previous screen as shown in Figure 17. Select 

NVIDIA NForce

Storage Controller

 and press ENTER.

Figure 17

(Note) If you want to create RAID, select both 

NVIDIA RAID CLASS DRIVER

 and then 

NVIDIA

N F o r c e Storage Controller

.

If you do not create RAID, select 

NVIDIA NForce Storage Controller

 only.

Figure 18

If a message appears saying one or some file(s) cannot be found, please check the floppy disk
or copy the correct SATA driver again from the motherboard driver CD.

Windows Setup

 ENTER=Select   F3=Exit

You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.

Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.

NVIDIA RAID CLASS DRIVER (required)
NVIDIA NForce Storage Controller (required)

Windows Setup

S=Specify Additional Device   ENTER=Continue   F3=Exit

Setup will load support for the following mass storage device(s):

NVIDIA RAID CLASS DRIVER (required)

   * To specify additional SCSI adapters, CD-ROM drives, or special

 disk  controllers for use with Windows, including those for
 which you have a device support disk from a mass storage device
 manufacturer, press S.

   * If you do not have any device support disks from a mass storage

 device manufacturer, or do not want to specify additional
 mass storage devices for use with Windows, press ENTER.