Материнские платы GIGABYTE GA 8GEM800 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
BIOS Setup
- 35 -
English
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360K
type is 40 trac ks 720K, 1.2M and 1.44M are all 80 tracks.
Disabled
BIOS will not search for the type of floppy disk drive by track number. Note
that there will not be any warning message if the drive installed is 360K.
(Default value)
Enab led
BIOS searches for floppy disk drive to determine if it is 40 or 80 tracks. Note
that BIOS can not tell from 720K, 1.2M or 1.44M drive type as they are all 80
tracks.
Password Check
Setup
The system will boot but will not access to Setup page if the correct
password is not entered at the prompt. (Default value)
S y s t e m
The system will not boot and will not access to Setup page if the correct
password is not entered at the prompt.
If you want to cancel the setting of password, please just press ENTER to make [SETUP] empty.
CPU Hyper-Threading
This option appears only when the processor you install supports Intel
®
Hyper-Threading Technology.
Enab led
Enable CPU Hyper-Threading feature. Please note that this feature is only
w o r k i n g for operating system with multiprocessors mode supported. (Default
v a l u e )
Disabled
Disable CPU Hyper-Thr eading.
Limit CPUID Max. to 3
This option is available onl y when you install an Intel
®
Prescott processor (with 533MHz FSB).
Enab led
Limit CPUID Maximum value to 3 when using older OS like NT 4. (Defaults
v a l u e )
Disabled
Disable CPUID Limit for Windows XP.
Init Display First
Select the first initiation of the monitor display from onboard/AGP or PCI VGA card.
PCI
Set Init Display First to PCI VGA card.
Onboar d/AGP Set Init Display First to onboard/AGP VGA card.(Default value)
Graphics Aperture Size
This option is available only when you use the onboard V GA function.
128MB
Set Graphics Aperture Size to 128MB. (Default value)
Disabled
Disable this function.
Graphics Share Memory
This option is available only when you use the onboard V GA function.
8M B
Set Graphics Share Memory to 8MB. (Default value)
1M B
Set G raphics Share Me mory to 1MB.
