GIGABYTE GA 73PVM S2H rev 1 0 - Инструкция по эксплуатации - Страница 80

GA-73PVM-S2H Motherboard

- 8 0 -

If a message appears saying one or some file(s) cannot be found, please check the floppy disk

or copy the correct SA TA RAID driver again from the motherboard driver disk.

Figure 3

Windows Setup

 ENTER=Select   F3=Exit

        You have chosen to configure a SCSI Adapter for use with Windows,
         using a device support disk provided by an adapter manufacturer.

         Select the SCSI Adapter you want from the following list, or press ESC
         to return to the previous screen.

NVIDIA RAID Driver  (required)
NVIDIA nForce Storage Controller (required)

Figure 4

Windows Setup

S=Specify Additional Device Enter=Continue   F3=Exit

    Setup will load support for the following mass storage device(s):

    NVIDIA RAID Driver (required)

   * To specify additional SCSI adapters, CD-ROM drives, or special

 disk  controllers for use with Windows, including those for
 which you have a device support disk from a mass storage device
 manufacturer, press S.

   * If you do not have any device support disks from a mass storage

 device manufacturer, or do not want to specify additional
 mass storage devices for use with Windows, press ENTER.

Step 3:

When installing the RAID driver, for example, if Setup correctly recognizes the driver in the floppy disk,
a controller menu 

(Note)

 similar to that in Figure 3 below will appear. Use the arrow keys to select 

NVIDIA

RAID Driver

 and press <Enter>. Later, when a screen similar to that in Figure 4 appears, you must

press <S> to select an additional driver. The screen will return to previous screen as shown in Figure
3. Select 

NVIDIA nForce Storage Controller

 and press <Enter>.

(Note) The selectable item(s) displayed in  Figure 3 may differ according to the RAID or AHCI driver

you will install.