GIGABYTE GA 73PVM S2H rev 1 0 - Инструкция по эксплуатации - Страница 42

GA-73PVM-S2H Motherboard

- 4 2 -

Limit CPUID Max. to 3 

(Note)

Allows you to determine whether to limit CPUID maximum value. Set this item to 

Disabled

 for

Windows XP operating system; set this item to 

Enabled

 for legacy operating system such as

Windows NT4.0. (Default: Disabled)

No-Execute Memory Protect

 (Note)

Enables or disables Intel

®

 Execute Disable Bit function. This function may enhance protection for

the computer, reducing exposure to viruses and malicious buffer overflow attacks when working
with its supporting software and system. (Default: Enabled)

CPU Enhanced Halt (C1E)

 (Note)

Enables or disables Intel

®

 CPU Enhanced Halt (C1E) function, a CPU power-saving function in

system halt state. When enabled, the CPU core frequency and voltage will be reduced during
system halt state to decrease power consumption. (Default: Enabled)

CPU Thermal Monitor 2 (TM2)

 (Note)

Enables or disables Intel

®

 CPU Thermal Monitor (TM2) function, a CPU overheating protection

function. When enabled, the CPU core frequency and voltage will be reduced when the CPU is
overheated. (Default: Enabled)

CPU EIST Function

 (Note)

Enables or disables Enhanced Intel SpeedStep T echnology (EIST).  Depending on CPU loading,
Intel

®

 EIST technology can dynamically and effectively lower the CPU voltage and core frequency

to decrease average power consumption and heat production. (Default: Enabled)

Virtualization Technology

 (Note)

Enables or disables Intel

®

 Virtualization Technology. Virtualization enhanced by Intel

®

 Virtualization

Technology will allow a platform to run multiple operating systems and applications in independent
partitions. With virtualization, one computer system can function as multiple virtual systems.
(Default: Enabled)

Onboard GPU

Enables or disables the onboard VGA function.

Enable If No Ext GPU

Activates the onboard VGA only if no PCI Express VGA card is installed. (Default)

Always Enable

Always activates the onboard VGA, whether or not a PCI Express card is installed. If you wish to
set up a dual view configuration, set this item to 

Always Enable

.

Frame Buffer Size

Frame buffer size is the total amount of system memory allocated solely for the onboard graphics
controller. MS-DOS, for example, will use only this memory for display. Options are: 16M, 32M,
64M, 128M (default), 256M, Disabled.

Init Display First

Specifies the first initiation of the monitor display from the installed PCI graphics card,
PCI Express graphics card, or the onboard VGA.

PCI Slot

Sets the PCI graphics card as the first display. (Default)

Onboard VGA Sets the onboard VGA as the first display.

PEG

Sets PCI Express graphics card as the first display.

(Note) This item is  present only if you install a CPU that supports this feature. For more information

about Intel CPUs' unique features, please visit Intel's website.